Read Sony MEX-DV900 / MEX-DV90EE Service Manual online
MEX-DV90EE/DV900
10
1
2
3
182 m
m
53 mm
Dashboard
Tablero
Ҿ㸼ᵓ
Tablero
Ҿ㸼ᵓ
A
TOYOTA
to dashboard/center console
al tablero o consola central
㟇Ҿ㸼ᵓЁ༂ࠊㆅ
al tablero o consola central
㟇Ҿ㸼ᵓЁ༂ࠊㆅ
Bracket
Soporte
ᠬᶊ
Soporte
ᠬᶊ
Bracket
Soporte
ᠬᶊ
Soporte
ᠬᶊ
B
NISSAN
to dashboard/center console
al tablero o consola central
㟇Ҿ㸼ᵓЁ༂ࠊㆅ
al tablero o consola central
㟇Ҿ㸼ᵓЁ༂ࠊㆅ
Bracket
Soporte
ᠬᶊ
Soporte
ᠬᶊ
Bracket
Soporte
ᠬᶊ
Soporte
ᠬᶊ
Existing parts supplied with your car
Piezas existentes suministradas con su automóvil
䱣≑䔺䰘䗕ⱘ⦄᳝䚼ӊ
Piezas existentes suministradas con su automóvil
䱣≑䔺䰘䗕ⱘ⦄᳝䚼ӊ
1
2
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
᳔ሎᇌ
hPP
5 × 8 mm
᳔ሎᇌ
hPP
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
᳔ሎᇌ
hPP
5 × 8 mm
᳔ሎᇌ
hPP
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
᳔ሎᇌ
hPP
5 × 8 mm
᳔ሎᇌ
hPP
max. size
5 × 8 mm
(
5 × 8 mm
(
7
/
32
×
11
/
32
in)
Tamaño máx.
5 × 8 mm
᳔ሎᇌ
hPP
5 × 8 mm
᳔ሎᇌ
hPP
Face the hook
inwards.
El gancho debe
encontrarse en la
parte interior.
䩽ᄤ䴶ݙDŽ
inwards.
El gancho debe
encontrarse en la
parte interior.
䩽ᄤ䴶ݙDŽ
Claws
Uñas
व⟾
Uñas
व⟾
Orient the release key
correctly.
Oriente la llave de
liberación en la
dirección correcta.
ℷ⹂⹂ᅮᓔ䫕䩹࣭ᮍDŽ
correctly.
Oriente la llave de
liberación en la
dirección correcta.
ℷ⹂⹂ᅮᓔ䫕䩹࣭ᮍDŽ
Existing parts supplied with your car
Piezas existentes suministradas con su automóvil
䱣≑䔺䰘䗕ⱘ⦄᳝䚼ӊ
Piezas existentes suministradas con su automóvil
䱣≑䔺䰘䗕ⱘ⦄᳝䚼ӊ
Fire wall
Cortafuegos
䰆☿ຕ
Cortafuegos
䰆☿ຕ
Foot brake type
Tipo de freno de pedal
㛮ࠊࡼൟ
Tipo de freno de pedal
㛮ࠊࡼൟ
Parking brake switch cord
Cable de conmutación del
freno de estacionamiento
ذ䔺ࠊࡼᓔ݇⬉㒓
Cable de conmutación del
freno de estacionamiento
ذ䔺ࠊࡼᓔ݇⬉㒓
Hand brake type
Tipo de freno manual
ࠊࡼൟ
Tipo de freno manual
ࠊࡼൟ
Parking brake switch cord
Cable de conmutación del
freno de estacionamiento
ذ䔺ࠊࡼᓔ݇⬉㒓
Cable de conmutación del
freno de estacionamiento
ذ䔺ࠊࡼᓔ݇⬉㒓
A
B
Warning if your car’s ignition
has no ACC position
Be sure to set the Auto Off function. For details, see the
supplied Operating Instructions.
The unit will shut off completely and automatically in
the set time after the unit is turned off, which prevents
battery drain.
If you do not set the Auto Off function, press and hold
until the display disappears each time you turn
the ignition off.
RESET button
When the installation and connections are completed,
be sure to press the RESET button with a ball-point pen,
etc., after detaching the front panel.
Precautions
• Choose the installation location carefully so that the
unit will not interfere with normal driving operations.
• Avoid installing the unit in areas subject to dust, dirt,
excessive vibration, or high temperatures, such as in
direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a safe
and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Connecting the parking brake
cord
Be sure to connect the parking cord (Light green) of
to the parking brake switch cord. The mounting position
of the parking brake switch cord depends on your car.
Consult your car dealer or your nearest Sony dealer for
further details.
Removing the protection collar
and the bracket
Before installing the unit, remove the protection
collar
and the bracket from the unit.
1
Remove the protection collar
.
Engage the release keys together with the
protection collar
.
Pull out the release keys to remove the
protection collar
.
2
Remove the bracket
.
Insert both release keys together between
the unit and the bracket
until they click.
Pull down the bracket , then pull up the unit
to separate.
Mounting example
Installation in the dashboard
Notes
• Bend these claws outward for a tight fit, if necessary (
-2).
• Make sure that the 4 catches on the protection collar
are
properly engaged in the slots of the unit (
-3).
Mounting the unit in a Japanese
car
You may not be able to install this unit in some makes of
Japanese cars. In such a case, consult your Sony dealer.
Note
To prevent malfunction, install only with the supplied screws
.
How to detach and attach the
front panel
Before installing the unit, detach the front panel.
-A To detach
Before detaching the front panel, be sure to press
.
Press
, and pull it off towards you.
-B To attach
Engage part
of the front panel with part of the unit,
as illustrated, and push the left side into position until it
clicks.
Click on the first or last page to see other MEX-DV900 / MEX-DV90EE service manuals if exist.