Read Sony MDX-F5800 Service Manual online
9
MDX-F5800
6
A
B
1
2
A
B
1
182 m
m
53 mm
Dashboard
Fire wall
4
2
3
1
1
5
2
3
c
4
1
2
4
6
6
c
c
c
1
Orient the release key correctly.
Face the hook inwards.
Claws
Precautions
• Choose the installation location carefully so that
the unit will not interfere with normal driving
operations.
operations.
• Avoid installing the unit in areas subject to dust,
dirt, excessive vibration, or high temperature,
such as in direct sunlight or near heater ducts.
such as in direct sunlight or near heater ducts.
• Use only the supplied mounting hardware for a
safe and secure installation.
Mounting angle adjustment
Adjust the mounting angle to less than 45°.
Removing the protection collar
and the bracket (
and the bracket (
4
)
Before installing the unit, remove the protection
collar 4 and the bracket 1 from the unit.
collar 4 and the bracket 1 from the unit.
1
Remove the protection collar 4.
1 Engage the release keys 6 together with the
1 Engage the release keys 6 together with the
protection collar 4.
2 Pull out the release keys 6 to remove the
protection collar 4.
2
Remove the bracket 1.
1 Insert both release keys 6 together between
1 Insert both release keys 6 together between
the unit and the bracket 1 until they click.
2 Pull down the bracket 1, then pull up the
unit to separate.
Mounting example (
5
)
Installation in the dashboard
Notes
• Bend these claws outward for a tight fit, if
• Bend these claws outward for a tight fit, if
necessary (5-2).
• Make sure that the 4 catches on the protection
collar 4 are properly engaged in the slots of the
unit (5-3).
unit (5-3).
How to detach and attach the
front panel (
front panel (
6
)
Before installing the unit, detach the front
panel.
panel.
6
-A To detach
Before detaching the front panel, be sure to press
(OFF). Press (OPEN), then slide the front panel to
the right side, and pull out the left side.
(OFF). Press (OPEN), then slide the front panel to
the right side, and pull out the left side.
6
-B To attach
Place the hole A in the front panel onto the spindle
B
B
on the unit as illustrated, then push the left side
in.
Warning when installing in a car
without ACC (accessory)
position on the ignition key
switch
without ACC (accessory)
position on the ignition key
switch
After turning off the ignition, be sure to press
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and this
causes battery drain.
and hold (OFF) on the unit until the display
disappears.
Otherwise, the display does not turn off and this
causes battery drain.
RESET button
When the installation and connections are
completed, be sure to press the RESET button with
a ballpoint pen, etc., after detaching the front panel.
completed, be sure to press the RESET button with
a ballpoint pen, etc., after detaching the front panel.
Click on the first or last page to see other MDX-F5800 service manuals if exist.