Read Sony CDX-NC9950 Service Manual online
3
CDX-NC9950
• CD Playback:
You can play CD-DA (also containing CD TEXT*
1
), CD-R/CD-
RW (MP3 files also containing Multi Session and ATRAC CD
(ATRAC3 and ATRAC3plus format).
(ATRAC3 and ATRAC3plus format).
Type of discs
Label on the disc
CD-DA
MP3
ATRAC CD
*1 A CD TEXT disc is a CD-DA that includes information such as
disc, artist and track name.
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
as shown below.
• Connect the MAIN board (CN401) and the SERVO board (CN2)
with the extension cable (Part No. J-2502-076-1).
SERVO BOARD
CN2
CN2
MAIN BOARD
CN401
CN401
J-2502-076-1
NOTE FOR THE OPENING OF THE FRONT PANEL
In this set, the front panel is lowered to below the bottom face when
it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
it is opened.
When servicing the set, place it on a stand having a height of about
2 cm.
FORCED FRONT PANEL OPEN/CLOSE
The front panel is forced to OPEN/CLOSE at the timing that the
power (ACC) is turned off.
If the Z button for the front panel is not effective, the following
method is used:
power (ACC) is turned off.
If the Z button for the front panel is not effective, the following
method is used:
With the front panel open: The front panel is closed when ACC is
switched from ON to OFF edge.
With the front panel closed: The front panel is opened when ACC
is switched from ON to OFF edge.
NOTE FOR REPLACEMENT OF THE DIGITAL BOARD
When repairing, the complete DIGITAL board should be replaced
since any parts in the DIGITAL board cannot be repaired.
since any parts in the DIGITAL board cannot be repaired.
stand
Click on the first or last page to see other CDX-NC9950 service manuals if exist.