Read Sony CDX-GT517EE Service Manual online
4
CDX-GT517EE
NOTE FOR REPLACEMENT OF THE SERVO BOARD
When repairing, the complete SERVO board (A-1177-362-A) should
be replaced since any parts in the SERVO board cannot be repaired.
When repairing, the complete SERVO board (A-1177-362-A) should
be replaced since any parts in the SERVO board cannot be repaired.
NOTE FOR REPLACEMENT OF THE AUX JACK (J901)
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the front panel.
2. Place the KEY board on the front panel and align the terminals
To replace the AUX jack requires alignment.
1. Insert the AUX jack into the front panel.
2. Place the KEY board on the front panel and align the terminals
of the AUX jack with the holes in the KEY board.
3. Solder the three terminals of the jack.
KEY board
front panel
AUX jack
SERVO BOARD
CN2
CN2
MAIN BOARD
CN350
CN350
J-2502-076-1
EXTENSION CABLE AND SERVICE POSITION
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
When repairing or servicing this set, connect the jig (extension cable)
as shown below.
• Connect the MAIN board (CNP301) and the SERVO board (CN2)
with the extension cable (Part No. J-2502-076-1).
SECTION 1
SERVICE NOTE
Click on the first or last page to see other CDX-GT517EE service manuals if exist.