ZS-M30 - Sony Audio Service Manual (repair manual). Page 16

16

SHUF

PGM

During continuous playback (CLV: ON)
Tracking servo OFF

STOP (CLV: OFF)
Tracking servo ON
Recording mode OFF

TOC EDIT

TRACK

TIMER
MONO

REC

Recording mode ON

ABCD adjustment completed
Pit
CLV-S
FCS/TRK/AUTO GAIN successful

Groove
CLV-A
FCS successful, TRK unsuccessful

Each time the  DISPLAY  button is pressed, the display changes in the following order.

1. Mode display
Displays “TEMP ADJUST”, “CPLAYMODE”, etc.

2. Error rate display
Displays the error rate in the following way.

C1 = 

 AD = 

C1 = Indicates the C1 error.
AD = Indicates ADER.

3. Address display
The address is displayed as follows. (MO: recordable disc, CD: playback only disc)
Press the REPEAT buttons at the same time to switches between the groove display
and pit display.
h = 

 s = 

 (MO pit and CD)

h = 

 a = 

 (MO groove)

h = Indicates the header address.
s = Indicates the SUBQ address.
a = Indicates the ADIP address.

Note: “–” is displayed when servo is not imposed.

4. Auto gain display (Not used in servicing)
The auto gain is displayed as follows.
AG F = 

 T = 

5. IVR display (Not used in servicing)
The IVR is displayed as follows.
[ 

 ][ 

 ][ 

 ]

Function

Contents

REC/REC MODE

Sets continuous playback when pressed in the STOP state. When pressed during continuous
playback, the tracking servo turns ON/OFF.

u  (MD)

x    (MD)

M

m

DISPLAY

Z    (MD)

When pressed during continuous playback, switches between recording start stop.

Stops continuous playback and continuous recording.

The sled moves to the outer circumference only when this is pressed.

The sled moves to the inner circumference only when this is pressed.

Switches the displayed contents each time the button is pressed

Ejects the disc

Mode display

Error rate display

Address display

Auto gain display 

(Not used in servicing)

IVR display 

(Not used in servicing)