ZS-M30 - Sony Audio Service Manual (repair manual). Page 13

Read Sony ZS-M30 Service Manual online

13
ZS-M30
SECTION 4
TEST MODE
Refer to “5. ELECTRICAL ADJUSTMENT” for the test mode of CD section.
4-1. MD SECTION
1. PRECAUTIONS FOR USE OF TEST MODE
• As loading related operations will be performed regardless of the test mode operations being performed, be sure to check that the disc is
stopped before setting and removing it.
Even if the  Z (MD EJECT)  button is pressed while the disc is rotating during continuous playback, continuous recording, etc., the disc
will not stop rotating.
Therefore, it will be ejected while rotating.
Be sure to press the  Z (MD EJECT)  button after pressing the  NO/CANCEL  button and the rotation of disc is stopped.
1-1. Recording laser emission mode and operating buttons
• Continuous recording mode (CREC MODE)
• Laser power check mode (LDPWR CHECK)
• Laser power adjustment mode (LDPWR ADJUST)
• When pressing the  YES/ENTER  button.
4-2. SETTING THE TEST MODE
1. Set to standby state.
2. Press and hold the  YES/ENTER  button then press MD  u
  t    x   t  u  t   x    .
4-3. RELEASING THE TEST MODE
Remove the power cord to release the test mode.
4-4. BASIC OPERATIONS OF THE TEST MODE
All operations are performed with the following buttons: jogdial  . , >  ,  YES/ENTER  and  NO/CANSEL  .
The functions of these buttons are as follows.
JOG (  >  )
Proceeds the parameter/mode change.
JOG (  .  )
Returns to the parameter/mode change.
YES/ENTER
Goes ahead. Determines the setting/selection.
NO/CANCEL
Suspends.
Function name
 Function
Page of 82
Display

Click on the first or last page to see other ZS-M30 service manuals if exist.