Read Sony XDR-S100CD Service Manual online
XDR-S100CD
6
Playing tracks repeatedly
(repeat play)
(repeat play)
You can play tracks repeatedly in normal, shuffle or
program play modes.
program play modes.
1
Follow steps 1 and 2 in “Playing a CD”
2
Proceed as follows:
To repeat
Do this
A single track
1
Press REPEAT on the remote until
“REPEAT 1” appears.
“REPEAT 1” appears.
2
Press
N or . to
select the track that you want to
repeat.
repeat.
3
Press
V (# on the remote).
All tracks on the
CD
CD
1
Press REPEAT on the remote until
“REPEAT” appears.
“REPEAT” appears.
2
Press
V (# on the remote).
Tracks in
random order
random order
1
Start shuffle play (see “Playing
tracks in random order”).
tracks in random order”).
2
Press REPEAT on the remote until
“REPEAT” appears.
“REPEAT” appears.
3
Press
V (# on the remote).
Programmed
tracks files
tracks files
1
Program tracks (see “Creating
your own programme”).
your own programme”).
2
Press REPEAT on the remote until
“REPEAT” appears.
“REPEAT” appears.
3
Press
V (# on the remote).
To cancel repeat play
Press REPEAT on the remote until “REPEAT” disappears
from the display.
Press REPEAT on the remote until “REPEAT” disappears
from the display.
Playing tracks in random order
(shuffle play)
(shuffle play)
You can play tracks in random order.
1
Follow steps 1 and 2 in “Playing a CD”
2
Press MODE until “SHUFFLE” appears in the
display.
display.
3
Press
V (# on the remote) to start shuffle
play.
To cancel Shuffle Play
Stop playing first. Then press MODE until “SHUFFLE”
disappears from the display.
Stop playing first. Then press MODE until “SHUFFLE”
disappears from the display.
Tip
During shuffle play, you cannot select the previous track
by pressing
During shuffle play, you cannot select the previous track
by pressing
N ( on the remote).
Creating your own programme
(programme play)
(programme play)
You can arrange the playing order of up to 20 tracks on a CD.
1
Follow steps 1 and 2 in “Playing a CD”
2
Press MODE until “PROGRAM” appears in
the display.
the display.
3
Press
. or N or turn
TUNING/SELECT to select the track and then
press ENTER to add it to the programme.
press ENTER to add it to the programme.
Repeat to programme other tracks in the order that
you want.
After programming the first track, “STEP 1” appears,
followed by selected track.
Each time you add a track, a step number is added.
you want.
After programming the first track, “STEP 1” appears,
followed by selected track.
Each time you add a track, a step number is added.
4
Press
V (# on the remote) to start
Programme Play.
To cancel programme play
Stop playing first. Then press MODE until “PROGRAM”
disappears from the display.
Stop playing first. Then press MODE until “PROGRAM”
disappears from the display.
To clear the programme you set
[
Press CLEAR on the remote.
[
Stop playback first. Then press STOP
Y.
Tip
You can play the same programme again, since the
programme is saved until you eject the CD.
You can play the same programme again, since the
programme is saved until you eject the CD.
Connecting optional
component
component
To enhance your system, you can connect optional
components. Be sure to turn off the power of each
component before making any connections. For details, refer
to the instruction manual of the component to be connected.
components. Be sure to turn off the power of each
component before making any connections. For details, refer
to the instruction manual of the component to be connected.
To listen to the sound from optional
components in the unit
components in the unit
1
Connect the AUDIO IN jack on the unit to
the line output jack of the portable digital
music player or other components using an
audio connecting cable* (not supplied).
the line output jack of the portable digital
music player or other components using an
audio connecting cable* (not supplied).
* For a PC: use a cable which fills the connector of
your PC. For a TV or VCR: use a cable with a stereo-
mini plug on one end and two phono plugs on the
other end. For a portable digital music player: use a
cable with a stereo-mini plug on both ends.
mini plug on one end and two phono plugs on the
other end. For a portable digital music player: use a
cable with a stereo-mini plug on both ends.
2
Turn the unit and the connected component on.
3
Press AUDIO IN and start playing sound on
the connected component.
the connected component.
The sound from the connected component is output
from the speakers.
from the speakers.
To listen to the sound of the unit by optional
components
components
Connect the LINE OUT jack on the unit to the line in
jack of the other components.
jack of the other components.
Note
The volume and tone adjusted on this unit does not
affect the sound output from LINE OUT.
The volume and tone adjusted on this unit does not
affect the sound output from LINE OUT.
Using the timers
The unit offers three timer functions. If you use the
alarm timer or guide timer with the sleep timer, the sleep
timer has priority.
alarm timer or guide timer with the sleep timer, the sleep
timer has priority.
Setting the sleep timer
The sleep timer allows you to fall asleep to the sound of a
CD, the radio, or input from the AUDIO IN function. It
does this by automatically turning off the CD, the radio, or
input from the AUDIO IN function after a preset duration.
CD, the radio, or input from the AUDIO IN function. It
does this by automatically turning off the CD, the radio, or
input from the AUDIO IN function after a preset duration.
1
Press SLEEP while the unit is turned on.
“SLEEP” appears in the display.
2
Press SLEEP to set the sleep timer duration.
Each time you press SLEEP, the duration changes as
follows:
“AUTO*”
follows:
“AUTO*”
U “60” U “30” U “20” U “10” U “OFF”.
* When you select “AUTO,” the CD stops playing in
90 minutes at most and the unit goes off
automatically. When you are listening to the radio,
the radio goes off in 90 minutes.
automatically. When you are listening to the radio,
the radio goes off in 90 minutes.
The unit automatically turns off when the duration time
is passed.
4 seconds after you have finished the duration setting
and released SLEEP, “SLEEP” appears in the display and
back light will turn off, then the sleep timer starts. The
unit will play for the duration you set, and then shut off.
is passed.
4 seconds after you have finished the duration setting
and released SLEEP, “SLEEP” appears in the display and
back light will turn off, then the sleep timer starts. The
unit will play for the duration you set, and then shut off.
Note
Even if the duration is passed, the optional component
connected with AUDIO IN is not turned off.
Even if the duration is passed, the optional component
connected with AUDIO IN is not turned off.
To change the sleep timer setting
Repeat step 2 to select the desired sleep timer setting
even after the sleep timer has been activated.
even after the sleep timer has been activated.
To deactivate the sleep timer
[
Press POWER. The unit will turn off.
[
Press SLEEP to set the sleep timer “OFF,” only the sleep
timer will be cancelled (the unit stays ON).
timer will be cancelled (the unit stays ON).
Setting the alarm timer
You can set the unit to turn on automatically at a preset time.
The timer sound is selectable from DAB, FM, CD and
BUZZER.
Make sure you have set the clock.
The timer sound is selectable from DAB, FM, CD and
BUZZER.
Make sure you have set the clock.
To set the alarm timer
1
Press MENU to show the menu display.
2
Turn TUNING/SELECT (
or on the
remote) to select “TIMER SETTING,” then
press ENTER.
press ENTER.
3
Turn TUNING/SELECT (
or on the
remote) to select “TIMER A,” then press
ENTER.
ENTER.
4
Turn TUNING/SELECT (
or on the
remote) to select “SETTING,” then press
ENTER.
ENTER.
5
Turn TUNING/SELECT (
or on the
remote) to set the hour for on time, then press
ENTER.
ENTER.
The minute flashes. Perform the procedure above to
set the minute.
set the minute.
6
Repeat step 5 to set the time to stop playing.
7
Turn TUNING/SELECT (
or on the
remote) to select the desired sound from DAB,
FM, CD and BUZZER, then press ENTER.
FM, CD and BUZZER, then press ENTER.
8
Turn TUNING/SELECT (
or on the
remote) to adjust the wake-up volume, then
press ENTER.
press ENTER.
If you select DAB or FM, turn TUNING/SELECT
(
(
or on the remote) to select the desired
preset number, then press ENTER.
When you select the preset number “P--” during
DAB service reception, the most recent reception
service is received.
When you select the preset number “P--” during
DAB service reception, the most recent reception
service is received.
9
Press POWER to turn off the unit.
The unit turns on about 15 seconds before the preset
time.
If the unit is on at the preset time, the alarm timer
will not play.
time.
If the unit is on at the preset time, the alarm timer
will not play.
To stop the alarm timer
Press POWER.
Press POWER.
To deactivate the alarm timer
Perform the same procedure as in step 4 to select “OFF.”
“TIMER” and “A” turn off in the display.
Perform the same procedure as in step 4 to select “OFF.”
“TIMER” and “A” turn off in the display.
Setting the guide timer
To set the guide timer
You can set up to 10 guide timers using the EPG display
based on the downloaded DAB data.
Make sure you have download the EPG.
based on the downloaded DAB data.
Make sure you have download the EPG.
1
Follow steps 1 and 2 in “To set the alarm
timer.”
timer.”
2
Turn TUNING/SELECT (
or on the
remote) to select “GUIDE,” then press ENTER.
EPG appears in the display. “TIMER,” “B,” “GUIDE”
and the lowest number of the guide timer on which a
programme is not stored flash in the display.
and the lowest number of the guide timer on which a
programme is not stored flash in the display.
3
Turn TUNING/SELECT (
or on the
remote) and press SCAN + or – to select the
desired programme, then press ENTER.
desired programme, then press ENTER.
4
Turn TUNING/SELECT (
or on the
remote) to adjust the volume, then press
ENTER.
ENTER.
If you select the stored number in step 2, do the
following:
following:
1
Turn TUNIG/SELECT (
or on the
remote) and press SCAN + or – to select the
desired programme, then press ENTER.
desired programme, then press ENTER.
“SETTING” and “CANCEL” appear in the display.
2
Turn TUNIG/SELECT (
or on the
remote) to select “SETTING,” then press
ENTER.
ENTER.
3
Turn TUNIG/SELECT (
or on the
remote) to adjust the volume, then press
ENTER.
ENTER.
The setting is completed.
To erase the guide timer
1
Perform the same procedure as in steps 1 and
2 in “To set the guide timer,” turn TUNING/
SELECT (
2 in “To set the guide timer,” turn TUNING/
SELECT (
or on the remote) to
select the desired number and then press
ENTER.
ENTER.
“SETTING” and “CANCEL” appear in the display.
2
Turn TUNING/SELECT (
or on the
remote) to select “CANCEL,” then press
ENTER.
ENTER.
To set the guide timer directly by EPG.
1
Following “To display the EPG” and display
the desired EPG to setting the timer.
the desired EPG to setting the timer.
2
Press ENTER.
“TIMER,” “B,” “GUIDE” and the lowest number of
the guide timer on which a programme is not stored
flash in the display.
the guide timer on which a programme is not stored
flash in the display.
3
Turn TUNING/SELECT (
or on the
remote) to adjust the volume, then press
ENTER.
ENTER.
Notes
[
You cannot set the guide timer if the following
indications appear.
–“TIMEOVERLAPPING”: On-time of two or more
indications appear.
–“TIMEOVERLAPPING”: On-time of two or more
guide timers overlap.
–“TIMER NG”: The on-time and off-time are the
same.
–“TIMER FULL”: Maximum numbers of guide timers
have been already set.
[
If a guide timer activates while the power is turned on,
the power is not turned off when the off-time of the
guide timer passes.
the power is not turned off when the off-time of the
guide timer passes.
[
If another guide timer activates while a guide timer
sounds, the latter one has priority.
sounds, the latter one has priority.
[
If the on-time of the alarm timer and guide timer is
same, guide timer has priority.
same, guide timer has priority.
Other useful functions
Adjusting the tone
1
Press POWER to turn on the unit.
2
Press MENU to show the menu display.
3
Turn TUNING/SELECT to select “TONE
CONTROL,” then press ENTER to show the
setting display.
CONTROL,” then press ENTER to show the
setting display.
4
Turn TUNING/SELECT to adjust “TREBLE,”
then press ENTER.
then press ENTER.
5
Turn TUNING/SELECT to adjust “BASS,” then
press ENTER.
press ENTER.
Tips
[
The adjustable range of “TREBLE” and “BASS” is from
–4 to +4.
–4 to +4.
[
You can adjust “TONE” directly by pressing TONE on
the remote control. Press
the remote control. Press
or to adjust the
tone, then press ENTER.
Using the power saving mode
This unit has a power saving mode in AC operation.
While the AC power adaptor is connected in power off,
press DISPLAY for more than 2 seconds.
The following will occur:
While the AC power adaptor is connected in power off,
press DISPLAY for more than 2 seconds.
The following will occur:
[
Time display is turned off
[
Remote control does not work
[
EPG is all erased
To reset the unit
If the radio fails to function properly, do the following:
Press and hold STOP, ENTER and POWER at the same
time for a few seconds.
“RESET” appears in the display and the unit will revert
to the factory preset.
time for a few seconds.
“RESET” appears in the display and the unit will revert
to the factory preset.
Click on the first or last page to see other XDR-S100CD service manuals if exist.