Read Sony XDR-S100CD Service Manual online
XDR-S100CD
4
Initial setting for the DAB
When the AC power adaptor is plugged in, or the
batteries are installed for the first time after purchase (or
after resetting), the unit will automatically scan and
create a list of receivable broadcasts.
batteries are installed for the first time after purchase (or
after resetting), the unit will automatically scan and
create a list of receivable broadcasts.
1
Adjust the aerial accordingly.
2
Press POWER to turn on the radio.
“DAB TUNING”
U “DAB NO SERVICE” U “DAB
INITIAL SCAN” appears in the display, the unit will
automatically scan, create a list of receivable DAB
broadcasts and adjusts the clock.
automatically scan, create a list of receivable DAB
broadcasts and adjusts the clock.
DAB scan takes a few minutes. When finished, the
unit receives the first service in order stored by the
DAB scan.
unit receives the first service in order stored by the
DAB scan.
Notes
[
If you change the unit’s location of use, or want to
add a new service after the initial setting, press and
hold DAB/FM. “INITIAL SCAN?” appears in the
display and then press ENTER. The unit will
automatically scan and create a list of receivable
services.
add a new service after the initial setting, press and
hold DAB/FM. “INITIAL SCAN?” appears in the
display and then press ENTER. The unit will
automatically scan and create a list of receivable
services.
[
If you set the initial setting or scan, any DAB
services registered as preset are erased.
services registered as preset are erased.
[
If no services are found by the DAB scan, “NO
SERVICE” appears in the display. In that case, if
DAB is selected again, the unit will automatically
scan.
SERVICE” appears in the display. In that case, if
DAB is selected again, the unit will automatically
scan.
[
This unit supports only EPG in data service.
Set the clock
Do the following if DAB broadcasts are not available
(depending on area). The time setting mode by DAB
becomes invalid.
(depending on area). The time setting mode by DAB
becomes invalid.
1
Press MENU and turn TUNING/SELECT to
select “CLOCK SETTING,” and then press
ENTER.
select “CLOCK SETTING,” and then press
ENTER.
The hour indication will be displayed as follows.
2
Turn TUNING/SELECT to set the hour, and
then press ENTER.
then press ENTER.
3
Repeat step 2 to set the minutes.
After setting the time, the clock starts from 0
seconds.
seconds.
Notes
[
The time will be adjusted automatically during DAB
service reception.
service reception.
[
The clock system of this unit is 24-hour system (“0:00”
= midnight).
= midnight).
Time adjustment-
Summer time
Summer time
Time adjustment is performed only during DAB service
reception.
DAB service reception for at least one minute is required
to reset the time to Summer time.
reception.
DAB service reception for at least one minute is required
to reset the time to Summer time.
SECTION 1
GENERAL
This section is extracted
from instruction manual.
from instruction manual.
Operating the radio
The unit can receive DAB services and FM stations.
1
Press DAB/FM (RADIO/BAND on the
remote) to turn on the radio.
remote) to turn on the radio.
When the unit is turned on again, the last band you
listened to is received.
listened to is received.
2
Press DAB/FM (RADIO/BAND on the
remote) repeatedly to select the desired band.
remote) repeatedly to select the desired band.
Each press changes the band as follows:
DAB
FM
3
Turn TUNING/SELECT (press TUNE + or –
on the remote) to tune to the desired service
or station.
on the remote) to tune to the desired service
or station.
4
Adjust the volume using VOLUME.
Notes in FM usage
[
The frequency can be set in 0.05 MHz steps for FM.
[
If the FM broadcast is noisy, press and hold MODE on
the unit more than 2 seconds (press MODE on the
remote) until “MONO” appears in the display and the
radio will play in monaural.
the unit more than 2 seconds (press MODE on the
remote) until “MONO” appears in the display and the
radio will play in monaural.
[
When the unit receives an FM station transmitting
RDS data, text information appears in the display.
RDS data, text information appears in the display.
[
Each time you press DISPLAY, the display changes
current time and frequency.
current time and frequency.
To listen with headphones
You can enjoy the radio and external equipment
connected to the line in by headphones (not supplied).
Connect headphones (not supplied) to the
connected to the line in by headphones (not supplied).
Connect headphones (not supplied) to the
J
(headphones) jack. The speaker is deactivated when
headphones are connected.
headphones are connected.
Presetting your favorite
services or stations
services or stations
Presetting services and stations
You can preset 20 services and stations each for DAB and
FM.
FM.
1
Follow steps 1 to 3 in “Operating the radio”
and tune into service or station you wish to
preset.
and tune into service or station you wish to
preset.
2
Hold down MEMORY for more than 2
seconds.
seconds.
“ENTER PRESET NO.” appears and preset number
flashes in the display.
The next preset number from the most recent preset
is displayed (but if the last preset number was 20, 1
will be displayed).
flashes in the display.
The next preset number from the most recent preset
is displayed (but if the last preset number was 20, 1
will be displayed).
3
Turn TUNING/SELECT to select the preset
number, then press ENTER.
number, then press ENTER.
“PRESET COMPLETE!” appears in the display and
service or station is stored with the selected preset
number.
service or station is stored with the selected preset
number.
To preset another service or station, repeat these steps.
Notes
[
If you try to store another station with the same preset
number, the previously stored station will be replaced.
number, the previously stored station will be replaced.
[
If DAB reception is poor, the service may not be stored.
Playing preset services or
stations
stations
1
Press DAB/FM to select the band.
2
Press MODE on the unit until
“PRESET”
appears in the display.
3
Turn TUNING/SELECT to tune in the stored
service or station.
service or station.
Tip
On the remote, press PRESET + or – to tune in the
stored service or station.
On the remote, press PRESET + or – to tune in the
stored service or station.
Scan tuning (for FM)
The unit will automatically scan FM stations.
1
Press POWER to turn on the radio.
2
Press DAB/FM (RADIO/BAND on the
remote) to select the FM band.
remote) to select the FM band.
3
Hold down SCAN + or – (TUNE + or – on the
remote) for more than 2 seconds.
remote) for more than 2 seconds.
+ : scans to the higher frequency.
– : scans to the lower frequency.
Scanning starts from the frequency being tuned in.
When a station is received, scanning stops.
– : scans to the lower frequency.
Scanning starts from the frequency being tuned in.
When a station is received, scanning stops.
4
If necessary, turn TUNING/SELECT (press
TUNE + or – on the remote) to tune in to the
station more precisely.
TUNE + or – on the remote) to tune in to the
station more precisely.
5
Adjust the volume using VOLUME.
Click on the first or last page to see other XDR-S100CD service manuals if exist.