Read Sony TAV-L1 Service Manual online
6
TAV-L1
ERROR CODE FOR LIFT PROTECT
FL Display
Protect Kind
Detail Information
Majour Cause
Checking Target
DROP DOWN DETECT (PH1242)
LIFT ERR01
FG counter error
FG counter by LIFT position
Sensor broken
DROP UP DETECT (Q1262)
was exceeded standard value
STOP DOWN DETECT (PH1241)
STOP UP DETECT (Q1261)
DROP DOWN DETECT (PH1242)
LIFT ERROR02
Sensor error
Input from sensor was not
Sensor broken
DROP UP DETECT (Q1262)
correct
STOP DOWN DETECT (PH1241)
STOP UP DETECT (Q1261)
LIFT ERROR03
Motor fault
Fault of motor driver was
Motor driver broken
MOTOR DRIVER (IC916)
detected
LIFT ERROR04
Motor overcurrent
Overcurrent of motor driver
Motor driver broken
MOTOR DRIVER (IC916)
was detected
Restriction of LIFT motion
DROP DOWN DETECT (PH1242)
Limit timer for each operation
Restriction of LIFT motion
DROP UP DETECT (Q1262)
LIFT ERROR05
Operation timeout
was exceeded limit-timer
Sensor broken
STOP DOWN DETECT (PH1241)
Motor broken
STOP UP DETECT (Q1261)
MOTOR (M901)
Restriction of LIFT motion
MOTOR (M901)
LIFT ERROR06
Speed error
FG counter every 500 msec
Motor broken
BELT
was exceeded standard value
Belt broken
FG SENSOR (PH1251)
FG sensor broken
MAIN-
µ
COM
y
MAIN-
µ
COM
ySUB-
µ
COM
LIFT ERROR10
SUB-
µ
COM
connection error was detected
SUB-
µ
COM (IC901)
connection error
So, MAIN-
µ
COM reset
Hardware
I2C LINE
SUB-
µ
COM
NOTES ON REPLACEMENT OF CSP (CHIP SIZE
PACKAGE) IC
PACKAGE) IC
Replacement of K4D263238G-VC36T (IC5500) on the BE board
and
and
µ
PD61120AF1-100-JN1-A (IC3100) on the N board used in
this set requires a special tool.
NOTE OF REPLACING THE EEPROM (IC103) ON
THE DMB13 BOARD
THE DMB13 BOARD
EEPROM (IC103) on the DMB13 board cannot exchange with
single. When EEPROM (IC103) on the DMB13 board is damaged,
exchange the entire mounted board.
single. When EEPROM (IC103) on the DMB13 board is damaged,
exchange the entire mounted board.
NOTE OF HANDLING THE P BOARD (Part No. A-
1115-078-G)
1115-078-G)
When the P board is replaced by a repair for a fee, throw away the
P board after obtaining consent of not returning of the P board to
the customer. When throwing away the P board, be sure to throw
away after destroying P board physically with the hammer etc.
P board after obtaining consent of not returning of the P board to
the customer. When throwing away the P board, be sure to throw
away after destroying P board physically with the hammer etc.
ABOUT THE CASE WHERE “DEMO” OR “LOCKED”
IS DISPLAYED ON THE FLUORESCENT INDICATOR
TUBE
IS DISPLAYED ON THE FLUORESCENT INDICATOR
TUBE
The case where “DEMO” or “LOCKED” is displayed on the
fluorescent indicator tube when operating this set, refer to LIFT
DEMO MODE (page 39) (for case where “DEMO” is displayed)
and TRAY LOCK MODE (page 35) (for case where “LOCKED” is
displayed) on the Section 4. TEST MODE.
fluorescent indicator tube when operating this set, refer to LIFT
DEMO MODE (page 39) (for case where “DEMO” is displayed)
and TRAY LOCK MODE (page 35) (for case where “LOCKED” is
displayed) on the Section 4. TEST MODE.
Ver. 1.3
LED
ERROR
CODE
ERROR DESCRIPTION
02
Power Supply (PA) Protection Error
03
Power Supply (PB) Protection Error
04
Panel Error
05
DC Alert Protection Error
06
Speaker Protection Error
07
AC Det / OVP / Fan Error
08
Digital Error
09
Tuner Error
10
Sound Processor Error
11
Video Processor (SVP-EX) Error
12
Chroma Decoder (CXA2163) Error
13
AV Switch (CXA2069) Error
14
RTC IC Error
15
Temperature Sensor (LM75) Error
16
Port Expander 1 Error
17
Port Expander 2 Error
18
Port Expander 3 Error
19
NVM Error
20
IIC Error
LED ERROR CODE
Click on the first or last page to see other TAV-L1 service manuals if exist.