Read Sony STR-KIV300 Service Manual online
STR-KIV300
12
SVC SERVICE MODE
Note: The operation in this mode must use a remote commander and TV
monitor.
Setting method of the SVC service mode:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press button in order of the [
x
]
→ [DISPLAY] → [
X
]
→ [
M
]
on the remote commander. (Make the interval when each but-
ton is pressed within two seconds)
ton is pressed within two seconds)
4. The message “SVC” displayed on the fl uorescent indicator
tube. The OSD menu on TV monitor can be operated by re-
mote commander.
mote commander.
1. Main
Functions
• Diag
Performs unit test of devices installed on the board.
• Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Restores the unit to its factory settings.
• Network
Checks the wired network connection.
• Version
Up
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not
used.
• Drive
Write drive OP data and check drive.
• HDD
Mode
Not
used.
6. The message “Close” appears, and press the [
] button on the
remote commander.
Initialise Personal Information
Close
Initialisation complete.
7. Select “Reset to Factory Default Settings”, and press the [
]
button on the remote commander.
Initialise Personal Information
Reset to Factory Default Settings
Restore each setting to the factory
default setting.
Restore each setting to the factory
default setting.
8. Select “All Settings”, and press the [
] button on the remote
commander.
Reset to Factory Default Settings
Screen Settings
Audio Settings
BD/DVD Viewing Settings
Parental Control Settings
System Settings
External Input Settings
Network Settings
All Settings
Audio Settings
BD/DVD Viewing Settings
Parental Control Settings
System Settings
External Input Settings
Network Settings
All Settings
9. Select “Start”, and press the [
] button on the remote com-
mander.
All Settings
Restore all settings to the factory default
settings. The system will turn off after
reset.
settings. The system will turn off after
reset.
Start
Cancel
10. Initialisation ends when the message “HELLO” on the fl uores-
cent indicator tube disappears.
Click on the first or last page to see other STR-KIV300 service manuals if exist.