Read Sony STR-KIV300 Service Manual online
STR-KIV300
REVISION HISTORY
Ver.
Date
Description of Revision
1.0
2014.03
New
1.1
2014.05
Add MB1306 BOARD, COMPLETE (for SERVICE) in page 70 and 73.
Delete COVER, BACK in page 70.
Change P/N for C3014, C3025, C3031, C3032, C3033, C3041, C3042, C3106, C3107, C3115, C3122,
C3134, C3135, C3136, C3138, C3139, C3156, C3157, C3306, C3307, C3315, C3320, C3334, C3335,
C3336, C3338, C3339, C3356, C3357 and C3555 in AMP board.
1.2
2014.09
Add P/N and description for CARD WLAN/BT COMBO in page 69 and 79.
How to search for a contact point of signal lines or the like in DIAGRAMS SECTION
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
If a contact point of a BLOCK DIAGRAM, PRINTED WIRING BOARD or SCHEMATIC DIAGRAM is shown in a different page, use
the PDF fi le search function to fi nd one.
e.g.) If a contact point is shown as
, follow the procedure below.
Procedure:
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.
1. Press the [F] key while pressing the [Ctrl] key.
2. Input “>001Z” in the search box and press the [Enter] key.
3. The relevant part (page), where the contact point is shown, appears.
Note: If you still see the original page, press the [Enter] key again.