Read Sony STR-DA5600ES Service Manual online
STR-DA5600ES
22
SECTION 3
TEST MODE
MEMORY CLEAR MODE
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [TONE MODE] and [HDMI IN] buttons,
All preset contents are cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [TONE MODE] and [HDMI IN] buttons,
press the [
?/1
] button to turn on the main power.
2. The message “MEMORY CLEARING***” appears and the
memories are reset to the default values.
3. When done, the message “MEMORY CLEARED *” appears.
FACTORY PRESET MODE
The tuner preset are initialized.
Procedure:
1. While pressing the [TUNING MODE] and [2CH/A.DIRECT]
The tuner preset are initialized.
Procedure:
1. While pressing the [TUNING MODE] and [2CH/A.DIRECT]
buttons, press the [
?/1
] button to turn on the main power.
2. The message “Factory Preset” appears and tuner preset are ini-
tialization is preformed.
TUNER AM STEP CHANGE MODE
(US and Canadian models)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1. Press the [
(US and Canadian models)
Either the 9 kHz step or 10 kHz step can be selected for the AM
channel step.
Procedure:
1. Press the [
?/1
] button to turn on the main power.
2. Turn the [INPUT SELECTOR] dial to select the “AM TUN-
ER”.
3. Press the [
?/1
] button to turn off the main power.
4. While pressing the [TUNING MODE] button, press the [
?/1
]
button to turn on the main power.
5. Either the message “AM9k Step” or “AM10k Step” appears,
select the desired step.
SOUND FIELD CLEAR MODE
The preset sound fi eld is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [MUSIC] button, press the [
The preset sound fi eld is cleared when this mode is activated. Use
this mode before returning the product to clients upon completion
of repair.
Procedure:
1. While pressing the [MUSIC] button, press the [
?/1
] button to
turn on the main power.
2. The message “S.F. Initialize” appears and initialization is per-
formed.
FLUORESCENT INDICATOR TUBE DISPLAY TEST
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the [HDMI IN] and [MOVIE/HD-D.C.S.] but-
All fl uorescent segments are tested. When this test is activated, all
segments turn on at the same time, then each segment turns on one
after another.
Procedure:
1. While pressing the [HDMI IN] and [MOVIE/HD-D.C.S.] but-
tons, press the [
?/1
] button to turn on the main power.
2. All segments and all LEDs turn on.
3. Each time [DISPLAY] button to change as follows all on, test
3. Each time [DISPLAY] button to change as follows all on, test
pattern 1, test pattern 2, all off, all on in this order.
SWAP MODE
The signal will be swap to all channel so that all speaker will have
sound output.
Procedure:
1. While pressing the [MEMORY/ENTER] and [2CH/A. DI-
The signal will be swap to all channel so that all speaker will have
sound output.
Procedure:
1. While pressing the [MEMORY/ENTER] and [2CH/A. DI-
RECT] buttons, press the [
?/1
] button to turn on the main
power.
2. The message “SWAP MODE !” appears (No change while dis-
played).
SOUND FIELD LOCK ON/OFF CHANGE MODE
All buttons operation on/off of the front panel is changed.
Procedure:
1. While pressing the [HDMI IN] and [MUSIC] buttons, press
All buttons operation on/off of the front panel is changed.
Procedure:
1. While pressing the [HDMI IN] and [MUSIC] buttons, press
the [
?/1
] button to turn on the main power.
2. Either the message “SETTINGS LOCK [OFF]” or “SET-
TINGS LOCK [ ON]” appears.
COMMAND MODE CHANGE MODE
The command mode of the remote-commander which this set re-
The command mode of the remote-commander which this set re-
ceives can be changed.
Procedure:
1. While pressing the [2CH/A. DIRECT] button, press the [
1. While pressing the [2CH/A. DIRECT] button, press the [
?/1
]
button to turn on the main power.
2. Either the message “COMMAND MODE [AV1]” or “COM-
MAND MODE [AV2]” appears. Select the desired mode.
SOFTWARE VERSION DISPLAY MODE
The software version is displayed.
The software version is displayed.
Note: In this mode, never press the [
M] and [m] buttons on the remote
commander.
Procedure:
1. While pressing the [2CH/A.DIRECT] and [HDMI IN] buttons,
1. While pressing the [2CH/A.DIRECT] and [HDMI IN] buttons,
press the [
?/1
] button to turn on the main power.
2. The message “MAIN A56ES
∗∗∗ vX.XX” appears.
Each time the [DISPLAY] button is pressed, “SUB COMMON
C vX. XX”, “Video Ucom Ver X. XX”, “FAROUDJA Ver X.
XX”, “FAROUDJA2nd Ver X. XX”, “GUI CGROM Ver X.
XX”, “DSP Ucom Ver X. XX”, “DSP SFLASH Ver X.XX”
and “DSP PFLASH Ver X. XX” this order, and returns to the
“MAIN A56ES
C vX. XX”, “Video Ucom Ver X. XX”, “FAROUDJA Ver X.
XX”, “FAROUDJA2nd Ver X. XX”, “GUI CGROM Ver X.
XX”, “DSP Ucom Ver X. XX”, “DSP SFLASH Ver X.XX”
and “DSP PFLASH Ver X. XX” this order, and returns to the
“MAIN A56ES
∗∗∗ vX.XX” displayed.
SHIPMENT MODE
Initialize backup of EEPROM and Network and return to state of
the shipment.
Procedure:
1. While pressing the [HDMI IN], [TONE MODE] and [A.F.D.]
Initialize backup of EEPROM and Network and return to state of
the shipment.
Procedure:
1. While pressing the [HDMI IN], [TONE MODE] and [A.F.D.]
buttons, press the [
?/1
] button to turn on the main power.
2. The message “MEMORY CLEARING***” appears and return
to state of the shipment.
3. When done, the message “STANDBY” appears and turn off
the main power.
REBOX TEST MODE
Displayed the number of times of the power on after the shipment.
Procedure:
1. While pressing the [HDMI IN], [TONE MODE] and [MUSIC]
Displayed the number of times of the power on after the shipment.
Procedure:
1. While pressing the [HDMI IN], [TONE MODE] and [MUSIC]
buttons, press the [
?/1
] button to turn on the main power.
2. The message “REBOX- XX” appears.
KEY CHECK MODE
Button check.
Procedure:
1. While pressing the [HDMI IN], [TONE MODE] and [MOVIE/
Button check.
Procedure:
1. While pressing the [HDMI IN], [TONE MODE] and [MOVIE/
HD-D.C.S.] buttons, press the [
?/1
] button to turn on the main
power.
2. Either the message “REST 15” appears.
Every pressing of any button other than the [
?/1
] counts down
the buttons. The buttons which are already counted once are
not counted again. When all buttons are pressed “REST 00”
appears.
not counted again. When all buttons are pressed “REST 00”
appears.
Click on the first or last page to see other STR-DA5600ES service manuals if exist.