Read Sony SS-GT5DB Service Manual online
SS-GT5DB
4
1-4. TWEETER (47 mm) (SP3)
1-5. MIDRANGE (82 mm) (SP1, SP2)
1 two screws
(3.5
u 12)
front panel block
two bosses
hole
hole
– Rear bottom view –
2 loudspeaker (47 mm) (SP3) (tweeter)
Note: When installing the loudspeaker (47 mm) (SP3),
align the positions of the two bosses on the front
panel block with the two holes on the loudspeaker
(47 mm) (SP3).
1 four tapping screws
(1)
(3.5
u 14)
1 four tapping screws
(1)
(3.5
u 14)
2 Remove the loudspeaker (82 mm) (SP1)
block in the direction of the arrow.
2 Remove the loudspeaker
(82 mm) (SP2) block in
the direction of the arrow.
5 loudspeaker (82 mm) (SP2)
(midrange)
5 loudspeaker (82 mm) (SP1)
(midrange)
4 terminal [black]
(narrow
side)
4 terminal [black]
(narrow
side)
4 terminal [gray]
(wide
side)
4 terminal [gray]
(wide
side)
3 Push the protrusion, and remove
the
terminal.
Push
Push
Note: When installing the speaker wire, make the
position of caulking of terminals is outside.
OK
NG
Caulking is outside.
Caulking is inside.
,QVWDOODWLRQGLUHFWLRQIRUWKHVSHDNHUZLUH
protrusion
loudspeaker (82 mm) (midrange)
–7RSYLHZ–
Click on the first or last page to see other SS-GT5DB service manuals if exist.