Read Sony SS-GT5DB Service Manual online
SS-GT5DB
3
1-3. FRONT PANEL BLOCK-2
7 front panel block
Note
3: When installing the front panel block,
remove the used bond and use a new
bond to fix the front panel block.
– Bottom view –
1 Insert a flat-head screwdriver into
the front panel block, and lift it a little.
1 Insert a flat-head screwdriver into
the front panel block, and lift it a little.
2 Insert the jig into a space and raise
front panel block.
Note
1: When using a jig, please work so
as not to injure front panel block
and speaker cabinet.
2 Insert the jig into a space and raise
front panel block.
Note
1: When using a jig, please work so
as not to injure front panel block
and speaker cabinet.
3 All bosses are removed while
moving jig in the direction of
the arrow, and front panel
block is removed.
3 All bosses are removed while
moving jig in the direction of
the arrow, and front panel
block is removed.
4 Remove the front panel block
in the direction of the arrow.
6 terminal [black]
(wide
side)
6 terminal [gray]
(narrow
side)
OK
NG
Note 2: When installing the speaker wire, make the
position of caulking of terminals is outside.
Caulking is outside.
Caulking is inside.
,QVtDOODtioQ GiUeFtioQ IoU tKe VSeDNeU wiUe
5 Push the protrusion, and remove
the
terminal.
protrusion
loudspeaker (47 mm)
(SP3) (tweeter)
(SP3) (tweeter)
Push
total ten bosses
Push
Click on the first or last page to see other SS-GT5DB service manuals if exist.