Read Sony SCD-1 / SCD-777ES Service Manual online
6
2. STARTUP OPERATION
2-1. OPERATING PROCEDURE
Operating with a timer available on the market, the player will automatically start playing when a disc is inserted and the power is turned
on. In this case, the following five operations are performed.
(1) Power ON
When AC voltage is supplied to the power transformer through the power switch, different voltages are output from the power circuit.
When voltage is output, the reset signal is output and the set will start.
(2) Loading panel and stabilizer confirmation
If the loading panel is open, it will automatically be closed. Next, the presence of the stabilizer will be confirmed. If the stabilizer is not
there, “NO STABILIZER” will be displayed and set operations will stop.
(3) Spindle motor movement
When the stabilizer can be detected, the spindle motor will be moved to the side where the optical block is.
(4) Disc type detection
The type of disc that has been loaded will be detected. If the player judges that the disc cannot be played, it will display “TOC ERROR.”
Table 2-1. “TOC ERROR” Displays
Display
Disc Type
TOC ERROR*
Type that can’t be played (DVD, etc.)
TOC ERROR****
Illegal disc (pirated disc, etc.)
(5) Playback operation
Adjustment values are set in accordance with disc type. Playback will start after some adjustments have been made in keeping with the
disc. When the CD/SACD button setting differs from the disc detected, playback will start in accordance with the disc detected.
Click on the first or last page to see other SCD-1 / SCD-777ES service manuals if exist.