Read Sony SA-WCT260 Service Manual online
SA-WCT260
10
2-9. BOTTOM PANEL BLOCK
total six bosses
3 All bosses are removed while
moving jig in the direction of
the arrow, and bottom panel
block is removed.
3 All bosses are removed while
moving jig in the direction of
the arrow, and bottom panel
block is removed.
1 Insert a flat-head screwdriver in
two slits behind a unit, and lift
the bottom panel block a little.
4 bottom panel block
Note
3: When installing the bottom panel block,
remove the used bond and use a new
bond to fix the bottom panel block.
(No specific bond is designated for
this
purpose)
2 Insert the jig into a space and raise
bottom panel block.
Note
2: When using a jig, please work
so as not to injure bottom panel
block.
2 Insert the jig into a space and raise
bottom panel block.
Note
2: When using a jig, please work
so as not to injure bottom panel
block.
Note 1: Please spread a sheet
under a unit not to
injure top panel.
– Rear bottom side view –
• JIG
When disassembling the set, use the following jig (for speaker
When disassembling the set, use the following jig (for speaker
removal).
Part
No.
Description
J-2501-238-A
JIG FOR SPEAKER REMOVAL
Click on the first or last page to see other SA-WCT260 service manuals if exist.