Read Sony PCM-D100 Service Manual online
PCM-D100
23
4. OPERATION OF THE TEST MODE
4-1. Version
Model name, destination, ARM version, OMF version, system
version, eMMC capacity, unique ID, board discrimination number
and board ID can be confi rmed.
4-1. Version
Model name, destination, ARM version, OMF version, system
version, eMMC capacity, unique ID, board discrimination number
and board ID can be confi rmed.
Procedure:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press the [
v
] or [
V
] keys to select the “Version”, and press the
[
N
] key.
3. Model name, destination, ARM version, OMF version and sys-
tem version are displayed on page 1/3 of LCD display. Press
the [
the [
>
] key, eMMC capacity and unique ID are displayed on
page 2/3 of LCD display. Press the [
>
] key, board discrimi-
nation number and board ID are displayed on page 3/3 of LCD
display.
display.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<Version>
PCM-D100 CN
ARM 1.00.01
OMF 4.11.63
SYS 20130906RB
PCM-D100 CN
ARM 1.00.01
OMF 4.11.63
SYS 20130906RB
LCD of Display (page 1/3)
T
/
t
[Stop]:Ret
OMF version
System version
Model name/Destination
ARM version
<Version>
eMMC : 32GB
00130814
1E7ADAEB
eMMC : 32GB
00130814
1E7ADAEB
LCD of Display (page 2/3)
T
/
t
[Stop]:Ret
eMMC capacity
Unique ID
<Version>
YMMDDXXXX@
BoardID1: 2
BoardID2: 0
YMMDDXXXX@
BoardID1: 2
BoardID2: 0
LCD of Display (page 3/3)
T
/
t
[Stop]:Ret
Board discrimination number
Board ID
Board ID
Date and board discrimination number:
Y :
Year
(Hexadecimal)
MM :
Month
DD :
Day
XXXX : The number of the order of production of the above-
mentioned date
@
: Jig number
Releasing method:
Press the [
Press the [
x
STOP] key, return to test mode menu.
4-2. Sleep
It can change into the sleep state for standby current value mea-
surement.
It can change into the sleep state for standby current value mea-
surement.
Procedure:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press
the
[
v
] or [
V
] keys to select the “Sleep”, and press the
[
N
] key.
3. The sleep state selection screen is displayed.
This unit shifts to the sleep state by pressing the [T-MARK]
key.
key.
<Sleep>
Sleeping...
[STOP]:Ret
LCD Display
Releasing method:
Press the [
Press the [
x
STOP] key, return to test mode menu.
4-3. Deep Sleep
It can change into the deep sleep state for standby current value
measurement.
measurement.
Procedure:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press
the
[>] or [.] keys to select the “Deep Sleep”, and
press the [N] key.
3. The deep sleep state selection screen is displayed.
This unit shifts to the deep sleep state by pressing the [T-
MARK] key, and display is turned off.
MARK] key, and display is turned off.
Releasing method:
Press the [x STOP] key, return to test mode menu.
Press the [x STOP] key, return to test mode menu.
4-4. Off Deep Sleep
It can change into the off deep sleep state for standby current value
measurement.
It can change into the off deep sleep state for standby current value
measurement.
Procedure:
1. Enter the test mode.
1. Enter the test mode.
(Refer to “SETTING THE TEST MODE” on page 22)
2. Press
the
[
v
] or [
V
] keys to select the “Off Deep Sleep”, and
press the [
N
] key.
3. The off deep sleep state selection screen is displayed.
This unit shifts to the off deep sleep state by slide the [POW-
ER] switch in the direction of “OFF”, and display is turned off.
ER] switch in the direction of “OFF”, and display is turned off.
Releasing method:
Slide the [POWER] switch in the direction of “ON”, and press the
[x STOP] key, return to test mode menu.
Slide the [POWER] switch in the direction of “ON”, and press the
[x STOP] key, return to test mode menu.
Click on the first or last page to see other PCM-D100 service manuals if exist.