PCM-D100 - Sony Audio Service Manual (repair manual). Page 22

Read Sony PCM-D100 Service Manual online

PCM-D100
22
SECTION  3
TEST  MODE
1.  SETTING  THE  TEST  MODE
Note: Test mode is impossible when battery voltage is not enough. Do 
work using the battery with suffi cient battery level.
Setting method:
1.  Equip this unit with battery.
2.  Slide the [POWER] switch in the direction of “ON” until the 
window display appears.
POWER
3.  While pressing the [F1] and [T-MARK] keys, slide the 
[HOLD] switch in the direction of “ON” or “OFF” (Either 
“ON” or “OFF” is OK).
F1
T-MARK
HOLD
4.  While pressing the [F1] and [T-MARK] keys, slide the [HOLD] 
switch in the direction opposite to that specifi ed in step 3. 
5.  While pressing the [F1] and [T-MARK] keys, slide the [HOLD] 
switch in the direction opposite to that specifi ed in step 4. 
6.  The test mode menu is displayed, and enter the test mode. Re-
lease the [F1] and [T-MARK] keys.
 
(Displayed characters/values in the following fi gure are ex-
ample)
<Version>
<Sleep>
<Deep Sleep>
<Off Deep Sleep>
<Power Down>
LCD Display
R
 / 
r
 / [ENT]
B
2.  RELEASING  THE  TEST  MODE
Remove battery.
3.  CONFIGURATION  OF  THE  TEST  MODE
[
v
] key
[
V
] key
J
j
k
K
‡
‡
‡
‡
START
After turn on the power, stop or sleep condition.
While pressing the [F1] and [T-MARK] keys,
slide the [HOLD] switch ON or OFF
(Either ON or OFF is OK).
Slide the [HOLD] switch.
Remove battery.
Slide the [HOLD] switch.
End of test mode.
Determine
using
[
N
]
key
Return using
[
STOP]
key
Version
Sleep
Deep Sleep
Off Deep Sleep
Power Down
LCD Offset
LCD/Led/Light
Log Output
SIN
Menu Init
Factory Ship
Sircs Check
Keychk+Factory Ship
Version
Release the [F1] and [T-MARK] keys. 
Initial state of test mode
Page of 36
Display

Click on the first or last page to see other PCM-D100 service manuals if exist.