Read Sony NWZ-E583 / NWZ-E584 / NWZ-E585 Service Manual online
NWZ-E583/E584/E585
7
1-3. How to use the NC parameter setting tool
Note: Please use the NC parameter setting tool after closing music transfer
application software.
Procedure:
1. Connect “WALKMAN” to PC.
1. Connect “WALKMAN” to PC.
(The power supply of “WALKMAN” is automatically turned on)
2. Open the my computer window on PC, and confi rm how
“WALKMAN” is recognized on PC.
In the following example, “WALKMAN” is recognized by
MTP connection. In this case, the check of the drive letter is
unnecessary.
MTP connection. In this case, the check of the drive letter is
unnecessary.
In the following example, “WALKMAN” is recognized by
MSC connection. In this case, the check of the drive letter (at
this example, it is “F”) is necessary.
MSC connection. In this case, the check of the drive letter (at
this example, it is “F”) is necessary.
3. Start the command prompt application software, and move to
the folder in which the destination setting tool which wants to
write in is stored.
write in is stored.
(In this example, “cd c:\ICX1232” is inputted)
C:\>cd c:\ICX1232
C:\ICX1232>
4. Input the following command according to the information
checked at step 2.
MSC connection : updating.bat f:
(The part of “f” changes with drive letters)
C:\ICX1232>updating.bat f:
MTP connection : updating-mtp
C:\ICX1232>updating-mtp
5. Confi rm that the following message has been displayed, and
input “y”, and press the Enter key on PC.
C:\ICX1232>updating-mtp
###
### NC Gain Setting Tool for MTP
###
### Now Setting NC Gains to walkman.
### Continue? (y/n)y
6. Confi rm that the following message has been displayed, and
input the NC parameter data for L-ch confi rmed in “1-1. Out-
line” on page 6 and press the Enter key on PC.
line” on page 6 and press the Enter key on PC.
(In this example, “13” is inputted)
### Continue? (y/n)y
Please input L ch NC Gain ( Min: 0, Max:50 ): 13
7. Confi rm that the following message has been displayed, and
input the NC parameter data for R-ch confi rmed in “1-1. Out-
line” on page 6 and press the Enter key on PC.
line” on page 6 and press the Enter key on PC.
(In this example, “12” is inputted)
### Continue? (y/n)y
Please input L ch NC Gain ( Min: 0, Max:50 ): 13
Please input R ch NC Gain ( Min: 0, Max:50 ): 12
8. Confi rm that the following message has been displayed, and
input the “yes” and press the Enter key on PC.
(Displayed values in the following fi gure are example)
Please input L ch NC Gain ( Min: 0, Max:50 ): 13
Please input R ch NC Gain ( Min: 0, Max:50 ): 12
Now writing NCgain Lcn: 13 , Rch: 12 (yes/no) : yes
9. The “WALKMAN” reboots automatically after the NC param-
eter data is updated. After rebooting, the updating is success
when USB connection screen is displayed on the liquid crystal
display of the “WALKMAN”.
when USB connection screen is displayed on the liquid crystal
display of the “WALKMAN”.
After rebooting, check that USB connection screen is dis-
played on the liquid crystal display of the “WALKMAN”.
played on the liquid crystal display of the “WALKMAN”.
10. Input “exit” and press the Enter key on PC to close the com-
mand prompt application software.
C:\ICX1232>exit
11. Disconnect the “WALKMAN” from PC.
12. Press any key of “WALKMAN” to turn the power on.
13. Press the [BACK] key for more 1.5 seconds, the home menu is
12. Press any key of “WALKMAN” to turn the power on.
13. Press the [BACK] key for more 1.5 seconds, the home menu is
displayed.
14. Slide the [HOLD] key from OFF to ON.
15. Press the key as following order.
15. Press the key as following order.
[
u
]
[VOL –] [VOL +] [VOL –] [
b
]
[
v
]
[BACK]
[OPTION] [
B
]
[
V
]
16. The “WALKMAN” reboots and the color bar is displayed on
the liquid crystal display.
17. Enter the test mode when any keys are pressed in the state of
step 16, and slide the [HOLD] key from ON to OFF.
18. Press the [
v
]/[
V
] keys to select the “NC”, and press the [
B
] key
to enter the minor item.
MPTAPP (X.XX.XX)
POWER
AUDIO
VIDEO
OTHER
CLESTE
DAC
DIREC
FM
NC
NC
SHUTDOWN
EXITTEST
GAIN-L
GAIN-R
NCHPCHK
GAIN-R
NCHPCHK
Screen display
19. Press the [
v
]/[
V
] keys to select the “GAIN-L”.
MPTAPP (X.XX.XX)
POWER
AUDIO
VIDEO
OTHER
CLESTE
DAC
DIREC
FM
NC
NC
SHUTDOWN
EXITTEST
GAIN-L
GAIN-R
NCHPCHK
GAIN-R
NCHPCHK
Screen display
Click on the first or last page to see other NWZ-E583 / NWZ-E584 / NWZ-E585 service manuals if exist.