Read Sony NWZ-E583 / NWZ-E584 / NWZ-E585 Service Manual online
NWZ-E583/E584/E585
11
2-3. PANEL (REAR) BLOCK
1
screw (B1.4)
– Front bottom view –
2
Remove the common block
in the direction of an arrow.
3
Draw out HP jack from
the hole of panel (rear).
the hole of panel (rear).
4
panel (rear) block
common block
chassis assy
1
screw (B1.4)
switch
Note 1: When installing panel (rear) block,
align the position of switch and
knob
hold.
Note 2: When installing panel (rear) block,
align the position of two ditches and
chassis
assy.
Note 3: The sheet (conduction) is
easy to come off, please
be careful not to lose.
2-4. BATTERY WIRE
– Rear bottom view –
Note 1: Make sure to remove two solders of battery wires before
disassembling the mechanical common block.
Note 5: Arrange battery wires in the slot and do not twist.
Note 4: Arrange the battery wire away from the ribs.
cushion(PWB)
MAIN board
MAIN board
[red]
[black]
%atter\ wire VettiQJ
1 sheet (PWB)
sheet (PWB)
guide line
2 Remove two solders of battery wire.
Note 3: When the battery assy (BAT1) is removed,
refer to “ABOUT THE HANDLING OF
THE BATTERY ASSY (BAT1)” on page 3.
Note 2: When replacing some mounted board, soldering two
battery wires after all wirings are connected.
Click on the first or last page to see other NWZ-E583 / NWZ-E584 / NWZ-E585 service manuals if exist.