Read Sony NWZ-E583 / NWZ-E584 / NWZ-E585 Service Manual online
NWZ-E583/E584/E585
13
2-6. SW BOARD
– Front bottom view –
– SW board rear view –
Sheet (PWB SW) setting
guide line
guide line
4 SW board
SW board
3 sheet (PWB SW)
sheet (PWB SW)
2 Remove the SW board block
in the direction of an arrow.
1 connector
Note
2: When removing the connector,
lift vertically the SW board.
Note 1: the SW board cannot exchange with single.
When exchanging the SW board, exchange
it at the same time as the MAIN board.
2-7. SUPPORT A ASSY
– Front bottom view –
1 Remove the support A assy
in the direction of arrow.
3 Remove the support A
assy at an angle of 45°.
5 support A assy
2 two claws
2 three claws
4 two claws
support A assy
Note 1: When installing the support A assy,
check that two claws installed under
the chassis block assy.
Note 2: When installing the support A assy,
check that the rib is installed on top
of the chassis block assy.
chassis block assy
rib
two claws
Support A assy setting
Click on the first or last page to see other NWZ-E583 / NWZ-E584 / NWZ-E585 service manuals if exist.