Read Sony NW-ZX100 / NW-ZX100HN Service Manual online
NW-ZX100/ZX100HN
10
ABOUT THE REPAIRING OF BOARD
When the board installed by this unit is defective, replace the com-
plete mounted board. The individual mounted electrical parts can-
not replace and repair.
Moreover, the SW board cannot replace with single. If replace the
SW board, be sure to replace the MAIN board simultaneously.
The MAIN board can replace with single.
When the board installed by this unit is defective, replace the com-
plete mounted board. The individual mounted electrical parts can-
not replace and repair.
Moreover, the SW board cannot replace with single. If replace the
SW board, be sure to replace the MAIN board simultaneously.
The MAIN board can replace with single.
FORMATTING MEMORY
You can initialize your Walkman by formatting the memory.
1. From the Home menu, select
[Settings].
2. Select [Common Settings] - [Reset/Format] - [Format System Storage]
3. Follow the on-screen instructions to format the memory.
Note
Be sure not to initialize (format) the memory of your Walkman using a computer.
If you have formatted it with a computer, format it again using the Walkman.
Formatting the memory erases all content data (songs, etc., including the sample
data installed at the factory, and the supplied software installer). Be sure to check
the data stored in the memory and export any important data to your computer
before formatting.
If you have formatted it with a computer, format it again using the Walkman.
Formatting the memory erases all content data (songs, etc., including the sample
data installed at the factory, and the supplied software installer). Be sure to check
the data stored in the memory and export any important data to your computer
before formatting.
or [Format SD Card] - [ Yes].
RESETTING TO THE FACTORY SETTINGS
Your Walkman can be reset to the default settings. Resetting the Walkman
will not delete content such as music.
will not delete content such as music.
1. From the Home menu, select
[Settings].
2. Select [Common Settings] - [Reset/Format] - [Reset All Settings] - [Yes].
Note
If you reset your Walkman to the factory settings, the pairing information
of the connected Bluetooth devices will be deleted.
of the connected Bluetooth devices will be deleted.
NOTE OF REPLACING THE SCREWS
(Except for Chinese model)
There is the combination of the CASE and two screws that affi x the
BOTTOM PLATE to the CASE.
When replacing the screws, make sure that you confi rm the color
of the screws by referring to the fi gure below, and replace by using
the same screw color and size.
You can replace the CASE without regard for the color of the
screws.
(Except for Chinese model)
There is the combination of the CASE and two screws that affi x the
BOTTOM PLATE to the CASE.
When replacing the screws, make sure that you confi rm the color
of the screws by referring to the fi gure below, and replace by using
the same screw color and size.
You can replace the CASE without regard for the color of the
screws.
screw
bottom plate
Screw color
Screw size
Black
M1.4 × 3.0
Silver
M1.4 × 2.5
NOTES WHEN REPLACING THE WINDOW ASSY OR
CASE ASSY WITH THE DELETION OF THE WINDOW
SPACER
Along with changes to the window assy, the window spacer has
been deleted in the middle of production. Due to these changes,
there are certain combinations when replacing the window assy or
case assy. When replacing the window assy or case assy, follow the
descriptions below.
CASE ASSY WITH THE DELETION OF THE WINDOW
SPACER
Along with changes to the window assy, the window spacer has
been deleted in the middle of production. Due to these changes,
there are certain combinations when replacing the window assy or
case assy. When replacing the window assy or case assy, follow the
descriptions below.
Note: When replacing the case assy, be sure to refer to “NOTES WHEN
REPLACING THE CASE ASSY WITH THE ADDITION OF THE
LID GUIDE SPACER”.
LID GUIDE SPACER”.
• If a window spacer is installed
window spacer
window assy
case assy
Replacing the window assy:
Peel off the window spacer, and then install the window assy. You
cannot correctly install a new window assy while the window
spacer is installed.
Peel off the window spacer, and then install the window assy. You
cannot correctly install a new window assy while the window
spacer is installed.
Replacing the case assy (but not the window assy):
Re-affi x the window spacer or affi x a new window spacer to the
case assy.
Re-affi x the window spacer or affi x a new window spacer to the
case assy.
Replacing the case assy (also the window assy):
While the window spacer is peeled off, affi x a new window assy
to the case assy. You cannot correctly install a new window assy
while the window spacer is installed.
While the window spacer is peeled off, affi x a new window assy
to the case assy. You cannot correctly install a new window assy
while the window spacer is installed.
• If a window spacer is not installed
window assy
case assy
When replacing the window assy or case assy, replace them as is
with new parts.
with new parts.
Ver. 1.1
Click on the first or last page to see other NW-ZX100 / NW-ZX100HN service manuals if exist.