Read Sony NW-ZX100 / NW-ZX100HN Service Manual online
NW-ZX100/ZX100HN
5
NOTE OF THE MAIN BOARD ASSY REPLACING
When you replace the MAIN board assy, peel off the sheet (speak-
er) label from the old MAIN board assy before it replace it, and
paste it to the new MAIN board assy.
When you replace the MAIN board assy, peel off the sheet (speak-
er) label from the old MAIN board assy before it replace it, and
paste it to the new MAIN board assy.
– State remove the rear cover
and rear plate (bottom) –
and rear plate (bottom) –
– PWB holder side –
MAIN board
assy
assy
sheet (speaker) (yellow)
ABOUT WORKING OF THE BOARD REPLACING
When replaced the MAIN board and SW board, be sure to carry
out the following contents.
When replaced the MAIN board and SW board, be sure to carry
out the following contents.
Note 1:
The SW board cannot replace with single. Be sure to replace the
MAIN board and the SW board simultaneously.
1. Advance
preparation
To do the work, need the following tools.
Note 2:
Confi rm the method of obtaining the tool to the each service head-
quarters.
Note 3:
“yyyymmdd” of each fi les name represents the date of release.
Note 4:
Each tools, use for the OS of Windows 7 or later.
Note 5:
If you want to run the each tools, please close the SonicStage/x-
Application/Media Go etc. applications.
• Destination
setting
Change_Destination_NWZX100_yyyymmdd.zip
• Initial
setting
Color_Init_Setting_NWZX100_yyyymmdd.zip
• Destination and supplied headphones identifi cation
Determination_HP_NWZX100_yyyymmdd.zip
• NC gain setting
NC_gain_Setting_NWZX100_yyyymmdd.zip
Procedure:
1. On PC, unzip the prepared tools.
2. Copy the unzip folder to root directory of C drive on PC.
1. On PC, unzip the prepared tools.
2. Copy the unzip folder to root directory of C drive on PC.
Note 6:
The folder can be saved any drive as long as the folder path is
with English (one byte character).
Described with the example that “the folders were saved under
root directory of C drive” on this service manual.
2. Working
contents
Work according to the following order.
If the MAIN board and the SW board replaced simultaneously:
Destination setting (use for the “Destination setting” tool)
Destination setting (use for the “Destination setting” tool)
Initial setting (use for the “Initial setting” tool)
Initial setting (use for the “Initial setting” tool)
Confi rm settings (use for the “Destination and supplied head-
phones identifi cation” tool)
Confi rm settings (use for the “Destination and supplied head-
phones identifi cation” tool)
If the MAIN board is replaced alone:
NC parameter setting (use for the “NC gain setting” tool)
NC parameter setting (use for the “NC gain setting” tool)
2-1. Destination setting
Perform the destination setting and the initial setting of the main
unit simultaneously.
The settings by the supplied headphones, or the headphones sup-
plied or not are different. Please refer to “METHOD OF DISTIN-
GUISHING THE “WALKMAN” MAIN UNIT” on page 4 in ad-
vance.
Perform the destination setting and the initial setting of the main
unit simultaneously.
The settings by the supplied headphones, or the headphones sup-
plied or not are different. Please refer to “METHOD OF DISTIN-
GUISHING THE “WALKMAN” MAIN UNIT” on page 4 in ad-
vance.
Note 7:
Contents those have been recorded in this unit all will be erased.
IMPORTANT:
Be sure to use the destination setting tool select the correct
destination. It is a compliance violation to change the destination
to other regions.
Be sure to use the destination setting tool select the correct
destination. It is a compliance violation to change the destination
to other regions.
Used tool:
Change_Destination_NWZX100_yyyymmdd.zip
Change_Destination_NWZX100_yyyymmdd.zip
Procedure:
1. Connect “WALKMAN” to PC.
1. Connect “WALKMAN” to PC.
(The power supply of “WALKMAN” is automatically turned
on)
on)
2. Open the my computer window on PC, and confi rm how
“WALKMAN” is recognized on PC.
(In the following example, “WALKMAN” is recognized by
MSC connection)
MSC connection)
The check of the drive letter is necessary.
(At this example, it is “F”)
3. Confi rm the destination and the supplied headphone of this
unit.
(Refer to “METHOD OF DISTINGUISHING THE “WALK-
MAN” MAIN UNIT” on page 4)
MAN” MAIN UNIT” on page 4)
4. From in the “Change_Destination_NWZX100_yyyymmdd”
folder, copy the folder of specifi cations that you checked in
step 3 to root directory of C drive on PC.
step 3 to root directory of C drive on PC.
XX_EXHWM : for NW-ZX100HN
XX_NOHP : for NW-ZX100
• “XX” of represents destination.
Destination
Folder name
(above “XX”)
AEP, UK
CEW2
E, AUS, JE
E
EE
EE
CH
CN
5. Start the command prompt application software, and move to
the folder in which the destination setting tool which wants to
write in is stored.
write in is stored.
(In this example, “cd c:\CEW2_EXHWM” is inputted)
C:\Users\XXXXX>cd c:\CEW2_EXHWM
C:\CEW2_EXHWM>
– Continued on next page –
Click on the first or last page to see other NW-ZX100 / NW-ZX100HN service manuals if exist.