Read Sony NW-HD3 Service Manual online
13
NW-HD3
5-2-7. Digital sound preset check
“100 Hz/10 kHz 0 dBs L-ch/R-ch VOLUME: 27” audio signal is
outputted.
Checking method:
outputted.
Checking method:
1. Enter the audio test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “AUDIO”.
3. Press the
,
key to display minor item, and press the M m
key to select the “DSP 1”.
4. Press the
Bx
key, “START” is displayed and “100 Hz 0 dBs L-
ch/R-ch VOLUME: 27” audio signal is outputted. In this state,
each time [MODE] key is pressed, Base +3/–4 switch is performed.
each time [MODE] key is pressed, Base +3/–4 switch is performed.
5. Press the [MENU] key, return to minor item selection screen.
6. Press the M m key to select the “DSP 2”.
6. Press the M m key to select the “DSP 2”.
7. Press the
Bx
key, “START” is displayed and “10 kHz 0 dBs L-
ch/R-ch VOLUME: 27” audio signal is outputted. In this state,
each time [MODE] key is pressed, Treble +3/–4 switch is performed.
each time [MODE] key is pressed, Treble +3/–4 switch is performed.
8. Press the [MENU] key, return to minor item selection screen.
5-2-8. BEEP check
BEEP sound is outputted.
Checking method:
Checking method:
1. Enter the audio test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “AUDIO”.
3. Press the
,
key to display minor item, and press the M m
key to select the “BEEP”.
4. Press the
Bx
key, “START” is displayed and BEEP sound is
outputted.
5. Press the [MENU] key, return to minor item selection screen.
5-2-9. Sound pressure regulation level check
“1 kHz 0 dBs L-ch/R-ch VOLUME: 30” audio signal is outputted.
Checking method:
Checking method:
1. Enter the audio test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “AUDIO”.
3. Press the
,
key to display minor item, and press the M m
key to select the “SPL”.
4. Press the
Bx
key, “START” is displayed and “1 kHz 0 dBs
L-ch/R-ch VOLUME: 30” audio signal is outputted.
5. Press the [MENU] key, return to minor item selection screen.
5-3. Others
5-3-1. LCD NEGA/POSI switch setting
5-3-1. LCD NEGA/POSI switch setting
Negative/positive switch of LCD are performed.
Note:
Reboot is required in order to make setting reflect. When perform
“5-3-10. Contrast setting” or “5-3-14. Factory setting” after this
setting, be sure to perform after reboot.
“5-3-10. Contrast setting” or “5-3-14. Factory setting” after this
setting, be sure to perform after reboot.
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “OTHERS”.
3. Press the
,
key to display minor item, and press the M m
key to select the “LCD NP”.
4. Press the
Bx
key, “POSI” or “NEGA” is displayed. In this
state, each time [MODE] key is pressed, negative/positive
switch of LCD are performed.
switch of LCD are performed.
5. Press the [MENU] key, return to minor item selection screen.
5-3-2. G-sensor check
X/Y/Z-axis direction is checked.
Checking method:
Checking method:
1. Enter the test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “OTHERS”.
3. Press the
,
key to display minor item, and press the M m
key to select the “G TEST”.
AUDIO
LCD display
DSP 1
LCD display
START
LCD display
DSP 2
LCD display
AUDIO
LCD display
BEEP
LCD display
START
LCD display
AUDIO
LCD display
SPL
LCD display
START
LCD display
START
LCD display
OTHERS
LCD display
LCD NP
LCD display
POSI
LCD display
OTHERS
LCD display
G TEST
LCD display
Click on the first or last page to see other NW-HD3 service manuals if exist.