Read Sony NW-HD3 Service Manual online
11
NW-HD3
4. Press the
Bx
key, “START” is displayed and “1 kHz 0 dBs
L-ch/R-ch VOLUME: 27” audio signal is outputted. In this state,
each time [MODE] key is pressed, MUTE ON/OFF switch is
performed.
each time [MODE] key is pressed, MUTE ON/OFF switch is
performed.
5. Press the [MENU] key, return to minor item selection screen.
5-2-2. S/N check
“Infinity Zero VOLUME: 27” audio signal is outputted.
Checking method:
Checking method:
1. Enter the audio test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “AUDIO”.
3. Press the
,
key to display minor item, and press the M m
key to select the “SN”.
4. Press the
Bx
key, “START” is displayed and “Infinity Zero
VOLUME: 27” audio signal is outputted.
5. Press the [MENU] key, return to minor item selection screen.
5-2-3. Frequency characteristic check
“20 Hz/20 kHz/100 Hz/10 kHz 0 dBs L-ch/R-ch VOLUME: 27”
audio signal is outputted.
Checking method:
audio signal is outputted.
Checking method:
1. Enter the audio test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “AUDIO”.
3. Press the
,
key to display minor item, and press the M m
key to select the “F 1”.
4. Press the
Bx
key, “START” is displayed and “20 Hz 0 dBs
L-ch/R-ch VOLUME: 27” audio signal is outputted.
5. Press the [MENU] key, return to minor item selection screen.
6. Press the M m key to select the “F 2”.
6. Press the M m key to select the “F 2”.
7. Press the
Bx
key, “START” is displayed and “20 kHz 0 dBs
L-ch/R-ch VOLUME: 27” audio signal is outputted.
8. Press the [MENU] key, return to minor item selection screen.
9. Press the M m key to select the “F 3”.
9. Press the M m key to select the “F 3”.
10. Press the
Bx
key, “START” is displayed and “100 Hz 0 dBs
L-ch/R-ch VOLUME: 27” audio signal is outputted.
11. Press the [MENU] key, return to minor item selection screen.
12. Press the M m key to select the “F 4”.
12. Press the M m key to select the “F 4”.
13. Press the
Bx
key, “START” is displayed and “10 kHz 0 dBs
L-ch/R-ch VOLUME: 27” audio signal is outputted.
14. Press the [MENU] key, return to minor item selection screen.
5-2-4. Channel separation check
“1 kHz 0 dBs L-ch/1 kHz 0 dBs R-ch VOLUME: 27” audio signal
is outputted.
Checking method:
is outputted.
Checking method:
1. Enter the audio test mode.
2. Press the
2. Press the
,
key to display major item, and press the M m
key to select the “AUDIO”.
3. Press the
,
key to display minor item, and press the M m
key to select the “SEP LR”.
4. Press the
Bx
key, “START” is displayed and “1 kHz 0 dBs
L-ch VOLUME: 27” audio signal is outputted. In this state,
each time [MODE] key is pressed, V-SUR switch is performed.
each time [MODE] key is pressed, V-SUR switch is performed.
5. Press the [MENU] key, return to minor item selection screen.
6. Press the M m key to select the “SEP RL”.
6. Press the M m key to select the “SEP RL”.
START
LCD display
AUDIO
LCD display
SN
LCD display
START
LCD display
AUDIO
LCD display
F 1
LCD display
START
LCD display
F 2
LCD display
START
LCD display
F 3
LCD display
START
LCD display
F 4
LCD display
START
LCD display
AUDIO
LCD display
SEP LR
LCD display
START
LCD display
SEP RL
LCD display
Click on the first or last page to see other NW-HD3 service manuals if exist.