Read Sony ICD-UX532 / ICD-UX533 / ICD-UX533F / ICD-UX534F Service Manual online
ICD-UX532/UX533/UX533F/UX534F
9
2-6. ELECTRET CAP MICROPHONE BLOCK (L-ch)
2-7. MAIN BOARD
1
Remove two solders.
2
electret cap microphone block (L-ch)
MAIN board
electret cap
microphone
block (L-ch)
microphone
block (L-ch)
blue
white
:LUHVHWWLQJ
–)URQWWRSVLGHYLHZ–
1
Remove two solders.
1
Remove two solders.
1
Remove two solders.
8
sheet
(noise
control)
control)
7
connector
9
MAIN board
2
battery terminal (
−)
3
battery terminal (
+)
4
USB flexible board
5
screw (B1.4)
5
two screws
(B1.4)
(UX533F/
UX534F)
UX534F)
– Front top side view –
6
Remove the MAIN board
in the direction of an arrow.
MAIN board
black
black
red
red
Wire setting
Note 2: When replacing MAIN board, refer to “ABOUT THE
DESTINATION SETTING WHEN REPLACING THE
MAIN BOARD” on page 4.
MAIN BOARD” on page 4.
Note 1: When the MAIN board is replaced, the setup of LCD
backlight is required. Perform the setup of LCD back-
light with reference to “4-2. LCD BackLight” (page 13)
on test mode.
light with reference to “4-2. LCD BackLight” (page 13)
on test mode.
Click on the first or last page to see other ICD-UX532 / ICD-UX533 / ICD-UX533F / ICD-UX534F service manuals if exist.