Read Sony ICD-UX532 / ICD-UX533 / ICD-UX533F / ICD-UX534F Service Manual online
ICD-UX532/UX533/UX533F/UX534F
12
SECTION 3
TEST MODE
1. SETTING THE TEST MODE
Note: Test mode is impossible when battery voltage is not enough.
Do work using the battery with suffi cient battery level.
Setting method:
1. Equip this unit with battery.
2. Slide the [HOLD•POWER] switch in the direction of “POW-
1. Equip this unit with battery.
2. Slide the [HOLD•POWER] switch in the direction of “POW-
ER” until the window display appears.
HOLD
POWER
3. Slide the [DPC (SPEED CTRL)] switch to OFF.
DPC (SPEED CTRL) OFF
ON
4. While pressing the [STOP/
x
] and [VOL –] keys, slide the
[DPC (SPEED CTRL)] switch to ON.
DPC (SPEED CTRL) OFF
ON
STOP/x
VOL –
5. The test mode menu is displayed, and enter the test mode. Re-
lease the [STOP/
x
] and [VOL –] keys.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<SERVICE MENU>
ICD-UX532/CN
1.00.01
1.00.01
Destination
Model name
Firmware version
Model name
Firmware version
LCD Display
2. RELEASING THE TEST MODE
Remove battery.
Remove battery.
3. CONFIGURATION OF THE TEST MODE
[
.
] key
[
>
] key
J
j
k
K
Normal mode
Slide the [DPC (SPEED CTRL)] switch to OFF.
While pressing the [STOP/
x
] and [VOL –] keys,
slide the [DPC (SPEED CTRL)] switch to ON.
Release the [STOP/
x
] and [VOL –] keys.
Remove battery.
Initial state of test mode
End of test mode
Determine
using
[
N
]
key
Return using
[STOP/
x
] key
SERVICE MENU
VERSION
LCD BackLight
KEY CHECK
AUDIO LOOP
LCD BL_Manual
SIN
BEEP
LCD CONT
LCD PATTERN
RTC TEST
BATT A/D
ZLOAD
LOW DET
VBUS
FM TEST
KEY COUNT
SLEEP
BATT LIFE
WRITER VER
CHG LOG
LREC LOG
LREC LOG Clear
MENU INIT
SERVICE MENU
Click on the first or last page to see other ICD-UX532 / ICD-UX533 / ICD-UX533F / ICD-UX534F service manuals if exist.