Read Sony ICD-SX1000 / ICD-SX733 / ICD-SX733D / ICD-SX734 Service Manual online
ICD-SX733/SX733D/SX734/SX1000
17
4-6. Lcd/Led/Light
The lighting check of LCD can be performed.
The lighting check of LCD can be performed.
Procedure:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
] or [
V
] keys to select the “Lcd/Led/Light”, and
press the [
N
] key.
3. LCD display pattern is displayed as shown in the following
fi gure.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
LCD Display Pattern
All segments ON
Display pattern 2
All segments OFF
Display pattern 1
Peak
LED
(SX1000 only)
Recording
LED
Access
LED
Key input settings under this mode of operation:
[
>
] or [
.
]
: Display pattern change
[TRACK MARK] : Back light ON/OFF change
[
v
]
: All the LED lights up
[
V
]
: All the LED put out the lights.
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
4-7. INTMic Sens
Not used for the servicing.
Not used for the servicing.
4-8. INTMiC Clear
The internal stereo microphone sensitivity balance can be reset.
The internal stereo microphone sensitivity balance can be reset.
Note: When the internal stereo microphone is replaced, execute this mode.
Procedure:
1. Enter the test mode.
2. Press the [
1. Enter the test mode.
2. Press the [
v
] or [
V
] keys to select the “INTMiC Clear”, and
press the [
N
] key.
3. Press
the
[
N
] key again, and the internal stereo microphone
sensitivity balance is reset.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<INTMiC Clear>
Result : OK
Result : OK
Lch:03h Rch:03h
[Stop]:Ret
LCD Display
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
4-9. Log Output
The failure analysis log can be outputted.
The failure analysis log can be outputted.
Procedure:
1. Enter the test mode.
2. Press
1. Enter the test mode.
2. Press
the
[
v
] or [
V
] keys to select the “Log Output”, and press
the [
N
] key.
3. Press
the
[
N
] key again, and the log fi le is output to the root
folder of this unit.
(Displayed characters/values in the following fi gure are ex-
ample)
ample)
<Log Output>
Success
LCD Display
Root folder
XXXXXXXX: date of log outputted
Releasing method:
Press the [STOP/
Press the [STOP/
x
] key, return to test mode menu.
Click on the first or last page to see other ICD-SX1000 / ICD-SX733 / ICD-SX733D / ICD-SX734 service manuals if exist.