HTC-WX5, MHC-WX5, MHC-WX7AV - Sony Audio Service Manual (repair manual). Page 5

5

CD

> (AMS)

 s (TAPE B)  button +  DISC3  button

. (AMS)

 s (TAPE B)  button +  DISC1  button

M

 s (TAPE A)  button +  DISC3  button

m

 s (TAPE A)  button +  DISC1  button

TAPE A

> (AMS)

 DISC SKIP  button +  H  (TAPE B)

TAPE B

. (AMS)

 DISC SKIP  button +  h  (TAPE B)

M

 DISC SKIP  button +  H  (TAPE A)

m

 DISC SKIP  button +  h  (TAPE A)

This unit cannot be operated by itself as it does not come with a power supply.
Connect STR-WX5/WX7 as shown in “Connection 1” before beginning servicing.

Connection 1: If there is STR-WX5/WX7.

STR-WX5/WX7

SYSTEM CABLE 17P

SET

AC IN

Use a power supply jig (PFJ-1) if the STR-WX5/WX7 is not available.
Connect the conversion jig for connection (J-2501-138-A) as shown in “Connection 2” before beginning servicing.

Connection 2: If there is not STR-WX5/WX7.

Set

Conversion

Jig

(J-2501-138-A)

Power SW

Service Box (PFJ-1)

Connector

cable 17P

(Supplied with PFJ-1)

Connector

cable 17P

(Supplied with

Conversion Jig or Set)

FH-E939,838,737
MHC-6600,5600,3600,2600
CDP/TC

SYSTEM CONTROL

To operate the unit by itself, turn on the power of the conduction jig (PFJ-1), and press the  s (TAPE A)  ,  s (TAPE B)  , and  H (TAPE
B)   buttons together in this order.

As this unit is not equipped with fast forward and rewind buttons, buttons need to be combined and pressed together for different functions
when operating the unit by itself. (See Table-2.)
However, it will not operate properly if operations are performed without switching the functions.
Perform the following procedure to switch the functions before operating the unit.
The function selected is indicated by the  DISC NUMBER  indicator.

CD

x (CD)  button

1< 2< 3

+  HI-SPEED DUBBING  button

TAPE A

x (CD)  button

1< 2

3

+  z REC  button

TAPE B

x (CD)  button

1

2< 

3

+  h (TAPE A)  button

The function can be differentiated by the lighting of this part of the indicator.

↓

↓

1< 2< 3