Read Sony HT-RT5 Service Manual online
HT-RT5
30
7. Each time the [CLEAR AUDIO+] button on the remote com-
mander is pressed, VACS on/off setting is changed.
8. Each time the [VOICE] button on the remote commander is
pressed, gain value increase. Each time the [NIGHT] button on
the remote commander is pressed, gain value decrease.
the remote commander is pressed, gain value decrease.
(Gain value is +3.0 to –3.0)
(Displayed values in the above fi gure are example)
Releasing method:
There are following two releasing methods.
• Press the [
There are following two releasing methods.
• Press the [
@
/1
] button, the message “WAIT” → “RESET” is
displayed on the fl uorescent indicator tube and then turn the
power off.
power off.
•
Unplug the AC cord.
WIRELESS SOUND COLD RESET
It can initialize various backup information of Surround Speaker
(SA-SLRT5/SRRT5) and Subwoofer (SA-WRT5).
It can initialize various backup information of Surround Speaker
(SA-SLRT5/SRRT5) and Subwoofer (SA-WRT5).
Preparation:
Connect the Surround Speaker (SA-SLRT5/SRRT5), Subwoofer
(SA-WRT5) and the Bar Speaker (SA-RT5) by wireless.
Connect the Surround Speaker (SA-SLRT5/SRRT5), Subwoofer
(SA-WRT5) and the Bar Speaker (SA-RT5) by wireless.
Note: Refer to “NOTES ON THE WIRELESS CONNECTION (LINK)
AFTER REPAIRS ARE COMPLETE”on page 7 for details of
wireless connection.
wireless connection.
Procedure:
1. Press the [
1. Press the [
@
/1
] button to turn the power on.
2. Press the buttons on the remote commander in the order of [
x
]
→ [DISPLAY] → [BACK] → [V].
3. The on/standby indicator on the Surround Speaker (SA-
SLRT5/SRRT5) and Subwoofer (SA-WRT5) turns red and
fl ashes, then turns on orange.
fl ashes, then turns on orange.
On/standby indicator
Red (flash)
Red (flash)
t
Orange (light up)
On/standby indicator
Red (flash)
Red (flash)
t
Orange (light up)
– Subwoofer (SA-WRT5) –
– Surround speaker
(SA-SLRT5/SRRT5) –
4. Unplug the AC cord on the Surround Speaker (SA-SLRT5/
SRRT5) and Subwoofer (SA-WRT5) from an outlet and insert
the AC cord again.
the AC cord again.
BD SERVICE MODE
Note: The operation in this mode must use a TV monitor and supplied
remote commander.
Setting method of the BD service mode:
1. Connect this unit with TV monitor.
2. Press the [
1. Connect this unit with TV monitor.
2. Press the [
?/1
] button to turn the power on.
3. Press button in order of the [
x
] → [DISPLAY] → [
X
] → [
V]
on the remote commander.
(Make the interval when each button is pressed within one sec-
ond)
ond)
4. Enter the BD service mode. The OSD menu on TV monitor
can be operated by remote commander.
1. Main
Functions
• Diag
Performs unit test of devices installed on the board.
• Log
Error log is displayed. Displayed contents can also be saved in
an USB memory device.
an USB memory device.
• Factory
Initialize
Not used for the servicing.
• Network
Not used for the servicing.
• Version
Up
Not used for the servicing.
• System
Information
Displays the system information of the unit.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
• EMC
Test
Mode
Not used for the servicing.
• Drive
Not used for the servicing.
• HDD
mode
Not used in this unit.
• RF
TEST
MODE
Not used for the servicing.
Releasing method:
Turn the power off by pressing the [
Turn the power off by pressing the [
@
/1
] button.
Click on the first or last page to see other HT-RT5 service manuals if exist.