Read Sony HT-RT5 Service Manual online
HT-RT5
29
4. In the state of step 3, press the [INPUT] button on the remote
commander and “K 0” is displayed on the fl uorescent indicator
tube.
tube.
Each time a button on the unit is pressed, “K 0” value increas-
es. However, once a button is pressed, it is no longer taken into
account.
es. However, once a button is pressed, it is no longer taken into
account.
When pressing the all buttons, “OK” and “K 5” are alternately
displayed on the fl uorescent indicator tube.
displayed on the fl uorescent indicator tube.
5. Press
the
[
2
–] button on the remote commander and return to
the state of step 3.
6. In the state of step 3, press the [
2
+] button on the remote
commander and “MZ_A” (model name) is displayed on the
fl uorescent indicator tube. (“A” will display differs depending
on the destination)
fl uorescent indicator tube. (“A” will display differs depending
on the destination)
(Displayed characters in the above fi gure are example)
Each time the [
2
+] button on the remote commander is
pressed, the display changes from destination → system ver-
sion → IFCon audio coeffi cient version → BD coeffi cient ver-
sion → SPC version in this order, and returns to the model
name display.
sion → IFCon audio coeffi cient version → BD coeffi cient ver-
sion → SPC version in this order, and returns to the model
name display.
Model name
Destination
System version
IFCon audio
coefficient version
coefficient version
BD coefficient version
SPC version
(Displayed characters/values in the above fi gure are example)
Destination
Display
US and Canadian models (UC2)
NA
AEP model (CEL)
CE2
UK model (CEK)
CEK
African model (Except for
Kenyan, Tanzania, Nigerian) (E3)
Kenyan, Tanzania, Nigerian) (E3)
E3
Saudi Arabia, UAE, Kuwait, Iraqi,
Kenyan, Tanzanian and Nigerian
models (EA3)
Kenyan, Tanzanian and Nigerian
models (EA3)
EA3-2
Singapore model (SP1)
SP
Latin American model (Except for
Brazilian, Argentina) (LA9)
Brazilian, Argentina) (LA9)
MX6
Argentina model (AR2)
LATIN
Australian model (AU1)
AU
Chinese model (CN4)
CN
Releasing method:
Press the [
Press the [
@
/1
] button and return to the normal mode.
AMP TEST
It can the AMP setting and measurement.
It can the AMP setting and measurement.
Procedure:
1. Press the [
1. Press the [
@
/1
] button to turn the power on.
2. Press the buttons on the remote commander in the order of [
x
]
→ [DISPLAY] → [
2
–] → [
V].
3. The message “MSURE” is displayed on the fl uorescent indica-
tor tube and enter the AMP setting and measurement mode.
4. Each time the [DIMMER] button on the remote commander is
pressed, the swap mode changes from FULL → THRU → F2S
→ F2SB → F2CW in this order, and returns to the “FULL”
setting.
→ F2SB → F2CW in this order, and returns to the “FULL”
setting.
Display
Output speaker
FULL
The front L/R input is output to all speakers.
THRU
Each channel is directly output (through).
F2S
The front L/R input is output to surround L/R
speakers.
speakers.
F2SB
Not output to the speaker in this unit.
F2CW
The front R input is output to center/subwoofer
speakers.
speakers.
5. Each time the [
m
] button on the remote commander is
pressed, attenuate on/off setting is changed.
6. Each time the [
%
] button on the remote commander is pressed,
volume setting is changed.
The setting “V.N” is normal volume mode.
The setting “V.MSM”, press the [VOLUME +]/[VOLUME –]
buttons, the message is changed with “MIN” ↔ “VOL 1” ↔
“VOL 20” ↔ “MAX” on the fl uorescent indicator tube and
volume setting is changed.
buttons, the message is changed with “MIN” ↔ “VOL 1” ↔
“VOL 20” ↔ “MAX” on the fl uorescent indicator tube and
volume setting is changed.
– Continued on next page –
Ver. 1.2
Click on the first or last page to see other HT-RT5 service manuals if exist.