Read Sony HT-RT5 Service Manual online
HT-RT5
33
7. Diag (Wireless LAN Test)
This screen performs wireless LAN/Miracast test.
This screen performs wireless LAN/Miracast test.
Screen 1: Selects the wireless LAN test category
Operation:
[
Operation:
[
<
]/[
,
]
Selects the category
[
m
]/[
]
Moves to the selected category
[BACK]
Returns to the service top menu
Screen 2: Wireless LAN test
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check
Operation:
[
[1] Show WLAN HwInfo
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[5] Write P2P address to Registry
[6] P2P Registry Check
Operation:
[
M]/[
m
]
Selects the item
[
]
Executes the test
[BACK]
Returns to selection of test category
Screen 2: Select [1] Show WLAN HwInfo
(Displayed characters/values in the following fi gure are example)
•
(Displayed characters/values in the following fi gure are example)
•
Viewing the display
Serial : Serial number
Hard
Hard
: Hardware version
Mac
: Mac address
Screen 3: Select [2] Connect to AccessPoint
Connect access point only with the following AP settings.
CERT :
Connect access point only with the following AP settings.
CERT :
NO-ENCRYPT
WEPKEY :
abcdef1234
PMK :
ABCDE12345
SSID :
SONY-Test-R
IPADDR :
192.168.1.100
NETMASK :
255.255.255.0
BROADCAST :
192.168.1.10
When connect to AP, Status is “Connected!”
When cannot connect to AP, Status is “Can’t connect!”
When cannot connect to AP, Status is “Can’t connect!”
Screen 4: Select [3] Start Display RSSI Value
(Displayed characters/values in the following fi gure are example)
RSSI value is displayed.
(Displayed characters/values in the following fi gure are example)
RSSI value is displayed.
Screen 5: Select [4] Start Ping Test
Ping test is executed (IP address use the value of “192.168.1.10”).
OK: “192.168.1.10 OK!” is displayed
NG: “192.168.1.10 failed!” is displayed
Ping test is executed (IP address use the value of “192.168.1.10”).
OK: “192.168.1.10 OK!” is displayed
NG: “192.168.1.10 failed!” is displayed
Screen 6: Select [5] Write P2P address to Registry
•
•
Viewing the display
P2P device address : xx:xx:xx:xx:xx:xx
When write P2P address to registry is OK: “Write Successful!” is
displayed
When write P2P address to registry is NG: “Write Fail!” is dis-
played
When write P2P address to registry is OK: “Write Successful!” is
displayed
When write P2P address to registry is NG: “Write Fail!” is dis-
played
Screen 7: Select [6] P2P Registry Check
Check the P2P Registry address is the same as displayed in Screen
6.
Check the P2P Registry address is the same as displayed in Screen
6.
(Screen 3)
(Screen 5)
(Screen 4)
Diag
Diag
Category: Wireless LAN Test
Category: Wireless LAN Test
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[3] Start Display RSSI Value
[4] Start Ping Test
Serial : 201407220100276
HELP: [UP] [DOWN] [ENT] [RET]
Hard : 18
Mac : ec:0e:c4:18:43:d1
Mac : ec:0e:c4:18:43:d1
(Screen 1)
(Screen 2)
Category:
Wireless LAN Test
[1] Show WLAN HwInfo
[5] Write P2P address to Registry
[6] P2P Registry Check
[6] P2P Registry Check
Diag
Category: Wireless LAN Test
Category: Wireless LAN Test
[3] Start Display RSSI Value
[4] Start Ping Test
[4] Start Ping Test
IPADDR: 192.168.1.100
HELP: [UP] [DOWN] [ENT] [RET]
NETMASK: 255.255.255.0
BROADCAST: 192.168.1.10
BROADCAST: 192.168.1.10
[1] Show WLAN HwInfo
CERT: NO-ENCRYPT
WEPKEY: abcdef1234
PMK: ABCDE12345
SSID: SONY-Test-R
WEPKEY: abcdef1234
PMK: ABCDE12345
SSID: SONY-Test-R
Diag
Category: Wireless LAN Test
Category: Wireless LAN Test
RSSI Value: 0
HELP: [UP] [DOWN] [ENT] [RET]
Diag
Category: Wireless LAN Test
Category: Wireless LAN Test
Ping To 192.168.1.10
PING 192.168.1.10 OK!
PING 192.168.1.10 OK!
HELP: [UP] [DOWN] [ENT] [RET]
[2] Connect to AccessPoint
Status: Conncted!
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[4] Start Ping Test
[1] Show WLAN HwInfo
[5] Write P2P address to Registry
[6] P2P Registry Check
[6] P2P Registry Check
[2] Connect to AccessPoint
[3] Start Display RSSI Value
[3] Start Display RSSI Value
[4] Start Ping Test
[1] Show WLAN HwInfo
[5] Write P2P address to Registry
[6] P2P Registry Check
[6] P2P Registry Check
Click on the first or last page to see other HT-RT5 service manuals if exist.