Read Sony HCD-VM330AV Service Manual online
4
HCD-VM330AV
SECTION 1
SERVICING NOTES
CD-TEXT TEST DISC
This unit is able to display the test data (character information)
written in the CD on its fluorescent indicator tube.
The CD-TEXT TEST DISC (TGCS-313:4-989-366-01) is used
for checking the display.
To check, perform the following procedure.
written in the CD on its fluorescent indicator tube.
The CD-TEXT TEST DISC (TGCS-313:4-989-366-01) is used
for checking the display.
To check, perform the following procedure.
Checking Method:
1. Press the
I/1
button to turn the power on, set the disc to the
disc table with the “test disc” label facing up, and chuck the
disc.
disc.
2. Press the
[CD]
button to set CD function, and press the
n N
button
to playback the disc.
3. The following will be displayed on the liquid crystal display.
Display : 1KHZ/0DB/L R
4. Pressing the
[-- ]
or
[ +]
button, select the track. The text
data of each track will be displayed.
For details of the displayed contents for each track, refer to “Table
1: CD-TEXT TEST DISC TEXT Data Contents”.
For details of the displayed contents for each track, refer to “Table
1: CD-TEXT TEST DISC TEXT Data Contents”.
Restrictions in CD-TEXT Display
In this unit, some special characters will not be displayed prop-
erly. These will be displayed as a space or a character resembling
it.
erly. These will be displayed as a space or a character resembling
it.
Table 1: CD-TEXT TEST DISC TEXT Data Contents
(TRACKS No. 1 to 20:Normal Characters)
1
1kHz/0dB/L&R
2
20Hz/0dB/L&R
3
40Hz/0dB/L&R
4
100Hz/0dB/L&R
5
200Hz/0dB/L&R
6
500Hz/0dB/L&R
7
1kHz/0dB/L&R
8
5kHz/0dB/L&R
9
7kHz/0dB/L&R
10
10kHz/0dB/L&R
11
16kHz/0dB/L&R
12
18kHz/0dB/L&R
13
20kHz/0dB/L&R
14
1kHz/0dB/L&R
15
1kHz/–1dB/L&R
16
1kHz/–3dB/L&R
17
1kHz/–6dB/L&R
18
1kHz/–10dB/L&R
19
1kHz/–20dB/L&R
20
1kHz/–60dB/L&R
TRACK
No.
Displayed Contents
Note:
Track No. 21 to 99 are not displayed.
.
>
CLEANING OBJECTIVE LENS OF OPTICAL PICK-UP
• In cleaning the objective lens of optical pick-up, be sure the
following below.
(Figure A)
Note 1.
In cleaning the lens, do not apply an excessive force.
As the optical pick-up is vulnerable, application of excessive
force could damage the lens holder.
As the optical pick-up is vulnerable, application of excessive
force could damage the lens holder.
Note 2.
In cleaning, do not use a cleaner other than exclusive cleaning
liquid (KK-91 or isopropyl alcohol).
liquid (KK-91 or isopropyl alcohol).
Note 3.
Wipe the objective lens spirally from center toward outside. (See
Figure A)
Figure A)
2
Remove the
magnet assy.
magnet assy.
1
Open the torsion holder
(magnet) in direction of
arrow
(magnet) in direction of
arrow
A
.
A
optical pick-up
bracket (top 60) hole
3
Put a cotton bud into
the hole on the bracket
(top 60) and clean the
OP lens.
the hole on the bracket
(top 60) and clean the
OP lens.
Click on the first or last page to see other HCD-VM330AV service manuals if exist.