Read Sony HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D Service Manual online
HCD-SLK10D/SLK20D
19
2-14. MAIN BOARD-1
MAIN board
:LUHVHWWLQJ
Note 3: When you install the wire (flat type), please
install them correctly.
There is a possibility that this machine damages
when not correctly installing it.
Insert is straight
to the interior.
to the interior.
connector
Insert is incline.
wire
(flat type)
(flat type)
wire
(flat type)
(flat type)
connector
OK
NG
–5HDUERWWRPYLHZ–
1 Lift up two lead pins.
1 Lift up the lead pin.
qa Lift up the clamp (L35).
clamp (L35)
2 wire (flat type) (7 core)
(CN103)
3 wire (flat type) (9 core)
(CN301)
7 wire (flat type) (9 core)
(CN105)
4 wire (flat type) (11 core)
(CN101)
8 wire (flat type) (11 core)
(CN302)
0 wire (flat type) (11 core)
(CN109)
5 wire (flat type) (5 core)
(CN305)
6 wire (flat type) (13 core)
6 wire (flat type) (13 core)
(CN102)
9 connector (CN107)
Note
2: When you remove the connector, it is necessary
to note it because it is very hard.
qs connector
(CN900)
Note 1: Please spread a sheet under a unit
not to injure front panel.
Note 4: Do not insert the wire (flat type) in the same amount of
connector by mistake. Refer to
“2-21. HOW TO BEND
WIRE
(FLAT
TYPE)” (page 24) and “5-1. FLAME
PRINTED WIRING BOARDS” (page 31) for details.
:LUHVHWWLQJ
wire (flat type) (5 core)
tape
:LUHVHWWLQJ
lead pin
lead pin
lead pin
KEY_LEFT board
LOGO board
MAIN board
MAIN board
MAIN board
HP board
bottom side
Click on the first or last page to see other HCD-SLK10D / HCD-SLK20D / WHG-SLK10D / WHG-SLK20D service manuals if exist.