Read Sony HCD-S500HDE / NAS-SC500PK / SS-S500HDE Service Manual online
HCD-S500HDE/SS-S500HDE
2
NOTES ON CHIP COMPONENT REPLACEMENT
•
•
Never reuse a disconnected chip component.
•
Notice that the minus side of a tantalum capacitor may be dam-
aged by heat.
aged by heat.
FLEXIBLE CIRCUIT BOARD REPAIRING
•
•
Keep the temperature of soldering iron around 270 °C during
repairing.
repairing.
•
Do not touch the soldering iron on the same conductor of the
circuit board (within 3 times).
circuit board (within 3 times).
•
Be careful not to apply force on the conductor when soldering
or unsoldering.
or unsoldering.
SAFETY-RELATED COMPONENT WARNING!
COMPONENTS IDENTIFIED BY MARK
0 OR DOTTED LINE
WITH MARK
0 ON THE SCHEMATIC DIAGRAMS AND IN
THE PARTS LIST ARE CRITICAL TO SAFE OPERATION.
REPLACE THESE COMPONENTS WITH SONY PARTS
REPLACE THESE COMPONENTS WITH SONY PARTS
WHOSE PART NUMBERS APPEAR AS SHOWN IN THIS
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
MANUAL OR IN SUPPLEMENTS PUBLISHED BY SONY.
The self-diagnosis function has activated. A service
number consisting of five alphanumeric letters
(e.g., E 00 11) appears in the display when the self-
diagnosis function activates to prevent abnormal
operation.
number consisting of five alphanumeric letters
(e.g., E 00 11) appears in the display when the self-
diagnosis function activates to prevent abnormal
operation.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
Use of controls or adjustments or performance of procedures
other than those specifi ed herein may result in hazardous radia-
tion exposure.
This appliance is classifi ed as
a CLASS 1 LASER product.
This marking is located on
the rear exterior of the HCD-
S500HDE.
a CLASS 1 LASER product.
This marking is located on
the rear exterior of the HCD-
S500HDE.
SELF DIAGNOSIS FUNCTION
AM tuner section
Tuner:
AM tuner
Frequency range:
531 - 1,602 kHz (with the
interval set at 9 kHz)
interval set at 9 kHz)
Antenna:
AM loop antenna
Intermediate frequency:
450 kHz
DAB tuner section
(UK model only)
(UK model only)
Tuner:
DAB stereo tuner
Antenna:
DAB wire antenna
Frequency range:
Band-III: 174.928 (5A)
– 239.200 (13F) MHz
– 239.200 (13F) MHz
DAB frequency table (Band-III):
Frequency
Label
174.928 MHz
5A
176.640 MHz
5B
178.352 MHz
5C
180.064 MHz
5D
181.936 MHz
6A
183.648 MHz
6B
185.360 MHz
6C
187.072 MHz
6D
188.928 MHz
7A
190.640 MHz
7B
192.352 MHz
7C
194.064 MHz
7D
195.936 MHz
8A
197.648 MHz
8B
199.360 MHz
8C
201.072 MHz
8D
202.928 MHz
9A
204.640 MHz
9B
206.352 MHz
9C
208.064 MHz
9D
209.936 MHz
10A
211.648 MHz
10B
213.360 MHz
10C
215.072 MHz
10D
216.928 MHz
11A
218.640 MHz
11B
220.352 MHz
11C
222.064 MHz
11D
223.936 MHz
12A
225.648 MHz
12B
227.360 MHz
12C
229.072 MHz
12D
230.784 MHz
13A
232.496 MHz
13B
234.208 MHz
13C
235.776 MHz
13D
237.488 MHz
13E
239.200 MHz
13F
AUDIO IN:
TOP: Stereo mini jack
Voltage 0.8 V (high sensitivity),
impedance 10 kΩ
Voltage 0.8 V (high sensitivity),
impedance 10 kΩ
Rear: Phono jack
Voltage 1.5 V (low sensitivity),
impedance 10 kΩ
Voltage 1.5 V (low sensitivity),
impedance 10 kΩ
NETWORK port:
10BASE-T/100BASE-TX
USB port:
USB type A, Hi-Speed USB for
connecting USB devices such as
“WALKMAN”
connecting USB devices such as
“WALKMAN”
WM-PORT
Output voltage: DC 5 V
The maximum output current:
500 mA
(for connecting a “WALKMAN”
equipped with a WM-PORT)
The maximum output current:
500 mA
(for connecting a “WALKMAN”
equipped with a WM-PORT)
DMPORT
Output voltage: DC 5 V
The maximum output current:
700 mA
The maximum output current:
700 mA
PHONES jack:
Stereo mini jack
Accepts headphones of 8 Ω or
more
Accepts headphones of 8 Ω or
more
General
Power requirements:
230 V AC, 50/60 Hz
Power consumption:
65 W (0.5 W or lower at the
standard (power save) mode)
standard (power save) mode)
Dimensions (w/h/d) (including
projecting parts and controls):
projecting parts and controls):
UK model:
With the display window
lowered: approx. 285 × 143 ×
314.4 mm
With the display window raised:
approx. 285 × 193 × 317.4 mm
lowered: approx. 285 × 143 ×
314.4 mm
With the display window raised:
approx. 285 × 193 × 317.4 mm
Models except the UK
model
model
With the display window
lowered: approx. 285 × 143 ×
309.6 mm
With the display window raised:
approx. 285 × 193 × 311 mm
lowered: approx. 285 × 143 ×
309.6 mm
With the display window raised:
approx. 285 × 193 × 311 mm
Mass:
Approx: 5.0 kg
Operating temperature:
+5 °C to +35 °C (+41 °F to +95
°F)
°F)
Inputs/Outputs
Antenna terminals:
FM/DAB (UK model only):
75 Ω unbalanced
AM:
External antenna terminal
MONITOR OUT:
Phono jack
1 Vp-p, 75 Ω unbalanced
(NTSC)
1 Vp-p, 75 Ω unbalanced
(NTSC)
Operating humidity:
25 % to 80 %
Design and specifications are
subject to change without
notice.
subject to change without
notice.
Ver. 1.1
Click on the first or last page to see other HCD-S500HDE / NAS-SC500PK / SS-S500HDE service manuals if exist.