Read Sony HCD-GX8000 / HCD-RG77 Service Manual online
HCD-GX8000/RG77
16
1) Display of total error
EMC**: The number of mechanical error.
EDC**: The number of no disc error after chucking the disc.
EDC**: The number of no disc error after chucking the disc.
2) Display of mechanical errors
M*: The number of mechanical error (“00” is latest one)
(Press the
.
or
>
button to changes next error display)
$$: Not used
%%: Loading error (Second figure is not used)
%%: Loading error (Second figure is not used)
D: The error in the midst of close at the except mechanical
trouble.
E: The error in the midst of open at the except mechanical
trouble.
C: The error in the midst of chucking up at the except
mechanical trouble.
F: The error in the midst of chucking down at the except
mechanical trouble.
&&: Loading error
01: The error in the midst of chucking up.
02: The error in the midst of chucking down.
03: Time-out of EX-open.
05: Time-out of EX-close.
02: The error in the midst of chucking down.
03: Time-out of EX-open.
05: Time-out of EX-close.
##: Not used
3) Display of no disc errors
D*: The number of mechanical error(“00” is latest one)
(Press the
.
or
>
button to changes next error display)
$$: Error type
01: Focus error
02: GFS error
03: Set up error
02: GFS error
03: Set up error
%%: Not used
&&:
&&:
00: No disc judgment without chucking retry.
01: No disc judgment after chucking retry.
01: No disc judgment after chucking retry.
##: The state when judged no disc error
01: Stop
02: Set up
03: TOC read
04: Access
05: Play
06: Pause
07: Manual search (Play)
08: Manual search (Pause)
02: Set up
03: TOC read
04: Access
05: Play
06: Pause
07: Manual search (Play)
08: Manual search (Pause)
Display
EMC**EDC**
Display
M*$$%%&&##00
Display
D*$$%%&&##00
3. Tape Deck Section
The sequence during the aging mode is following as below.
If an error occurred, stop display that step.
If an error occurred, stop display that step.
Aging mode sequence (Tape deck section) :
Rewind the tape A and B
“TAPE A AG-1”
Shut off
FWD play the tape A
“TAPE A AG-2”
2 minutes
Fast forward the tape A
“TAPE A AG-3”
Shut off or 20 seconds
REV play the tape A
“TAPE A AG-4”
2 minutes
Rewind the tape A
“TAPE A AG-5”
Shut off
FWD play the tape B
“TAPE B AG-2”
2 minutes
Fast forward the tape B
“TAPE B AG-3”
Shut off or 20 seconds
REV play the tape B
“TAPE B AG-4”
2 minutes
Rewind the tape B
“TAPE B AG-5”
Shut off
Note:
“TAPE
*
AG-
*
” is display of each step.
[CD REPEAT 5 LIMIT OFF MODE]
Number of repeat for CD playback is 5 times when the repeat mode
is “REPEAT”. This mode enables CD to repeat playback for limitless
times.
Procedure:
1. Press the
is “REPEAT”. This mode enables CD to repeat playback for limitless
times.
Procedure:
1. Press the
?/1
button to turn the power on, and press the
[CD]
button to select the function “CD”.
2. Press three buttons of
x
,
[REPEAT]
, and
[CD]
simultaneously
to enter the CD repeat 5 limit off mode and display “REPEAT
OFF”.
OFF”.
3. To release this mode, operate the cold reset. (Refer to the “MC
COLD RESET”)
Click on the first or last page to see other HCD-GX8000 / HCD-RG77 service manuals if exist.