Read Sony HCD-GV6 / HCD-GV8 / LBT-GV6 / LBT-GV8 Service Manual online
4
HCD-GV6/GV8
NOTES ON HANDLING THE OPTICAL PICK-UP
BLOCK OR BASE UNIT
BLOCK OR BASE UNIT
The laser diode in the optical pick-up block may suffer electro-
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
static break-down because of the potential difference generated
by the charged electrostatic load, etc. on clothing and the human
body.
During repair, pay attention to electrostatic break-down and also
use the procedure in the printed matter which is included in the
repair parts.
The flexible board is easily damaged and should be handled with
care.
NOTES ON LASER DIODE EMISSION CHECK
The laser beam on this model is concentrated so as to be focused
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
on the disc reflective surface by the objective lens in the optical
pick-up block. Therefore, when checking the laser diode emis-
sion, observe from more than 30 cm away from the objective lens.
LASER DIODE AND FOCUS SEARCH OPERATION
CHECK
CHECK
Carry out the “S curve check” in “CD section adjustment” and
check that the S curve waveforms is output three times.
check that the S curve waveforms is output three times.
SECTION 1
SERVICING NOTES
• MODEL IDENTIFICATION
– Rear Panel –
– Rear Panel –
MODEL
PART No.
HCD-GV6: Malaysia and
Singapore models
4-232-090-0
[]
HCD-GV6: Saudi Arabia model
4-232-090-1
[]
HCD-GV8: Malaysia and
Singapore models
4-232-090-2
[]
HCD-GV6: Indonesia model
4-232-090-6
[]
SELF-DIAGNOSIS
This unit is equipped with a self-diagnosis function.
The function is used for diagnosing the conditions of the circuits
of the VIDEO board.
The circuits can be determined if normal or abnormal by the light-
ing of D502 of the VIDEO board.
The function is used for diagnosing the conditions of the circuits
of the VIDEO board.
The circuits can be determined if normal or abnormal by the light-
ing of D502 of the VIDEO board.
Lighting of D502
When lit
When lit
: Operates normally
Blinks repeatedly: The circuit may be faulty.
D502
IC505
– VIDEO Board (Side A) –
PART No.
Click on the first or last page to see other HCD-GV6 / HCD-GV8 / LBT-GV6 / LBT-GV8 service manuals if exist.