Read Sony DHC-FLX9W / HCD-FLX9W Service Manual online
7
HCD-FLX9W
DSP/GC/MB/MC/REGULATOR AND VIDEO BOARDS SERVICE POSITION
• In checking the DSP/GC/MB/MC/REGULATOR and VIDEO boards, prepare extension jig (Part No. J-2501-103-A: 1.00 mm Pitch, 29
cores, Length 300 mm).
CENTER SW AMP/FRONT REAR AMP/SP RELAY/SUB TRANS AND TRANS BOARDS SERVICE POSI-
TION
TION
• In checking the CENTER SW AMP/FRONT REAR AMP/SP RELAY/SUB TRANS and TRANS boards, prepare two extension jigs
(Part No. J-2501-242-A: 1.00 mm Pitch, 11 cores, Length 300 mm and Part No. J-2501-086-A: 1.00 mm Pitch, 19 cores, Length
300 mm).
300 mm).
VIDEO board
MB board
(CN501)
(CN501)
Connect extension jig (J-2501-103-A)
to the MB board (CN501) and
RF board (CN002).
to the MB board (CN501) and
RF board (CN002).
RF board
(CN002)
(CN002)
Any box to put.
DVD mechanism deck
MC board
GC board
REGULATOR board
DSP board
Connect extension jig (J-2501-242-A) to the
DSP board (CN601) and MC board (CN103).
DSP board (CN601) and MC board (CN103).
SP RELAY board
Connect extension jig (J-2501-086-A) to the
DSP board (CN602) and MC board (CN104).
DSP board (CN602) and MC board (CN104).
FRONT REAR AMP board
SVB TRANS board
TRANS board
chassis
CENTER SW AMP board
Note: When you check the reverse-side side of
Note: When you check the reverse-side side of
CENTER SW AMP board, please move
from a chassis.
from a chassis.
MC board
(CN104)
(CN104)
MC board
(CN103)
(CN103)
DSP board
(CN601)
(CN601)
DSP board
(CN602)
(CN602)
Click on the first or last page to see other DHC-FLX9W / HCD-FLX9W service manuals if exist.