Read Sharp 28JF-73H (serv.man25) User Guide / Operation Manual online
28JW-73H
32JW-73H
32JW-73H
COLOUR TELEVISION
For easy installation
•
•
•
•
•
PRINTED IN SPAIN
TINS-7196BMN0
04/02
TINS-7196BMN0
04/02
SHARP
ELECTRÓNICA
ESPAÑA, S.A.
SHARP ELECTRONICS
(U.K.) LTD.
Sharp House, Thorp Road, Newton Heath,
Manchester M40 5BE
5
NOW LET’S GET STARTED
INSTALLATION IS COMPLETE
PROBLEM
CHECK ITEM
PAGE
No picture or sound
Sound OK, poor picture
Picture OK, poor sound
Picture weak / No colour
Poor reception on some
channels
Remote control
does not work
TROUBLESHOOTING
6
9
6
19
6
16
16
19
20
6
16
14
6
6
9
9
3
If the TV does not react to Remote Control or hand buttons instructions, switch
ON/OFF and try again.
ON/OFF and try again.
Fitting the batteries into the remote control
Connecting the aerial cable
Tuning the TV channels
Using this installation guide
should enable you to set up your
TV in less than 15 minutes - - -
- - - Refer to your operation
manual for more tips and advice
should enable you to set up your
TV in less than 15 minutes - - -
- - - Refer to your operation
manual for more tips and advice
If problems persist, contact the SHARP Helpline (office hours only) on
tel: 08705 274277 (or (01) 676 0648 if telephoning from Ireland) and/or
WEB-SITE: www.sharp.co.uk/support
SAFETY WARNINGS
1 Select a well-ventilated location.
2 Avoid exposing the TV set to direct sunlight,
dust, heat sources, or moisture.
3 Do not place objects containing liquids or
candles on the top of the TV.
4 Never open the back cover.
5 Never insert objects into the TV.
6 Take care not to damage the power cord.
7 Keep the TV from strongly magnetic objects.
8 To prevent fire, never place any type of candle
or naked flames on the top or near the TV set.
Refer to the Operation Manual for:
Menu structures
p.10
Channel selection
p.15
Picture adjustments
p.16
Wide mode
p.17
Audio adjustments
p.19
Timer settings (ON/OFF Timer)
p.22
Child lock
p.23
Postcode
p.25
Teletext mode
p.28
- TV not plugged in Outlet power OFF
- Main power button of TV not ON
- Aerial not connected to terminal at the
back of the TV set
- Aerial not connected to terminal at the
back of the TV set
- Check SOUND volume and SOUND mute
- Aerial not connected to terminal at the
back of the TV set
back of the TV set
- Adjust COLOUR control
- Check if the Brightness or Contrast setting
in the picture adjustment mode might be
all the way to the minus side
in the picture adjustment mode might be
all the way to the minus side
- Increase the volume
- Check Audio levels
- Aerial not connected to terminal at the
back of the TV set
- Adjust COLOUR control
- Try fine tuning to correct
- Aerial not connected to terminal at the
back of the TV set
back of the TV set
- Check for local interference
- Check in your home aerial installation
- Check in your home aerial installation
- TV not plugged in Outlet power OFF 6
- Main power button of TV not ON
- Turn OFF using the main power button,
then turn ON again after a minute.
- Check the batteries in the Remote Control
then turn ON again after a minute.
- Check the batteries in the Remote Control
Q U I C K
S T A R T
G U I D E
S T A R T
G U I D E
1
2
The green power indicator will light.
3
The AUTO INSTALLATION message
will appear on your TV screen followed
by a diagram of typical connections.
will appear on your TV screen followed
by a diagram of typical connections.
Note:
If you need to repeat the AUTO
INSTALLATION, refer to the
relevant section on page 7 of the
operation manual.
INSTALLATION, refer to the
relevant section on page 7 of the
operation manual.
The AUTO INSTALLATION function will tune all available
TV stations into your TV.
The TV is ready to preset automatically all local channels
for you.
TV stations into your TV.
The TV is ready to preset automatically all local channels
for you.
Fitting the batteries
1.
2.
3.
1
2
Check List:
•
Is the TV connected to the mains?
•
Is the aerial connected to the TV?
3
4
If you do not intend to use your TV with
a VCR, proceed to stage 4.2.
a VCR, proceed to stage 4.2.
1
2
Press any button on
the remote control to
start Auto Channel
Preset.
the remote control to
start Auto Channel
Preset.
This tuning process may
take several minutes to
perform.
take several minutes to
perform.
3
VCR
Remote Control
R-6 (“AA” size) Dry Batteries
Operation Manual
SHARP
AUTO INSTALLATION
Be sure the antenna cable. . .
Searching,
please wait.
please wait.
Pr 01
TYPICAL CONNCETIONS
2
Aerial
(Not supplied)
(Not supplied)
Aerial Lead
(Not supplied)
(Not supplied)
30%
Stored programmes:
Pr01
CH21
BBC1
Pr02
CH31
BBC2
Pr03
CH41
ITV
Pr04
CH51
CH4
Pr05
CH61
CNN
Pr06
----- -
----- -
Pr07
----- -
----- -
Pr08
----- -
----- -
Pr09
----- -
----- -
Pr10
----- -
----- -
Edit this program
Go to sorting mode
Delete this program
Exit this menu
Go to sorting mode
Delete this program
Exit this menu
(red)
(green)
(yellow)
(blue)
(green)
(yellow)
(blue)
Back of TV
Back of TV
AUTO INSTALLATION
SUPPLIED ACCESORRIES
TYPICAL CONNECTIONS (Continued)
TURN ON TV FOR THE FIRST TIME
Press the main power button ( )
to start the AUTO INSTALLATION.
to start the AUTO INSTALLATION.
If the TV is used with a
VCR, turn on the VCR
and play back a
pre-recorded tape.
VCR, turn on the VCR
and play back a
pre-recorded tape.
The Stored programmes menu will appear on screen and
you can change the order of the channels and change or
give the channels a four-letter name.
you can change the order of the channels and change or
give the channels a four-letter name.
If you wish to rename the channels, or change the order,
refer to the page 8 chapter Stored programmes in the
operation manual.
refer to the page 8 chapter Stored programmes in the
operation manual.
Press the BLUE button
to exit.
28JW-73H
32JW-73H
32JW-73H
COLOUR TELEVISION
OPERATION MANUAL
PRINTED ON ENVIRONMENTALLY FRIENDLY PAPER
With your thumb
neil, pull up the
slit as shown.
neil, pull up the
slit as shown.
Insert the two
batteries as shown.
batteries as shown.
Replace the cover.
Mains Socket Outlet
AC 220~240 V, 50 Hz
AC 220~240 V, 50 Hz
TV set
Power indicator
Main power button
A SCART lead (not supplied) is recommended for use with this TV, to
obtain the best communication between your TV and VCR, refer
to page 32 of the operation manual.
obtain the best communication between your TV and VCR, refer
to page 32 of the operation manual.
Press any button on
the handset to start.
