Read Sony DAV-LF1H Service Manual online
DAV-LF1H
4
To assemble the front and surround speakers
Attach the speaker stands to the front and surround speakers. The procedure of assembling for the
surround speaker (L) (the left surround speaker) is slightly different from the others. (The surround
speaker (L) has the IR receiver.) Any difference in procedure is clearly indicated in the text, for
example, “For the surround speaker (L).”
surround speaker (L) (the left surround speaker) is slightly different from the others. (The surround
speaker (L) has the IR receiver.) Any difference in procedure is clearly indicated in the text, for
example, “For the surround speaker (L).”
Use the parts illustrated below.
1)
The front speakers and surround speaker (R) are identical. To discriminate between the speakers, see the label on
the rear of each speaker.
Front speaker (L) (left front speaker): White label
Front speaker (R) (right front speaker): Red label
Surround speaker (R) (right surround speaker): Gray label
the rear of each speaker.
Front speaker (L) (left front speaker): White label
Front speaker (R) (right front speaker): Red label
Surround speaker (R) (right surround speaker): Gray label
2)
Surround speaker (L) (left surround speaker): Blue label
3)
When unpacking, the speaker adaptor cover is attached to the speaker adaptor.
Tip
You can install the front speakers and the surround speakers on a wall using an optional kit (not supplied).
Front speakers
and surround
speaker (R)
1)
(3)
Surround
speaker (L)
2)
(1)
Post (4)
Base (4)
Speaker
adaptor
3)
(4)
Speaker
adaptor cover
3)
(4)
Speaker cords
(3) (white, red,
(3) (white, red,
gray)
Cord clamp (1)
Screws
silver, small (8)
black, large (12)
black, medium (1)
IR
receiver
receiver
Fully-assembled illustration
The speaker that has the IR receiver is the surround speaker (L) (left surround speaker), the speaker
that is connected to the surround speaker (L) is the surround speaker (R) (right surround speaker),
and others are the front speakers.
that is connected to the surround speaker (L) is the surround speaker (R) (right surround speaker),
and others are the front speakers.
1
Insert the post into the base, and secure the base with screws. (for all speakers)
* Do not remove the screw that is attached to the post. The screw is to prevent the speaker from slipping.
IR receiver
Front speaker (L): White label
Front speaker (R): Red label
Front speaker (R): Red label
Surround speaker (R):
Gray label
Gray label
Speaker
system cord
system cord
White
Red
Surround speaker (L):
Blue label
Blue label
Base
Post
Post cover
(upper part)
,
Screws (black, large) (3)
Bottom of the base
Cord clamp
For the surround
speaker (L)
speaker (L)
Screw (black, medium)
Screw
*
Secure the cord clamp
with the screw.
with the screw.
4
(For the surround speaker (L))
Draw the speaker cord first, then draw the speaker system cord into the post.
Draw the speaker cord first, then draw the speaker system cord into the post.
Tip
Tilt the post so that the cords are drawn smoothly.
For the next procedure of the surround speaker (L), skip to step 7.
Speaker cord
Post
Speaker system cord
,
Fold back the speaker cord
about 100 mm and twist
together.
After drawing through, untwist
and straighten out the speaker
cord.
about 100 mm and twist
together.
After drawing through, untwist
and straighten out the speaker
cord.
Post
Speaker system
cord
cord
Hook the speaker
cord and speaker
system cord in the
cord clamp.
cord and speaker
system cord in the
cord clamp.
Bottom of the base
2
Remove the post cover, slide the speaker adaptor onto the post, adjust the height of the
speaker adapter, and secure it with the screws. (for all speakers)
speaker adapter, and secure it with the screws. (for all speakers)
Note
Keep the post cover handy, so you can replace it later.
3
(For the surround speaker (L))
Connect the connector of the speaker cord to the speaker.
Connect the connector of the speaker cord to the speaker.
Screws
Speaker
adaptor
adaptor
,
Post
Hook
(upper part)
(upper part)
,
Post cover
Screws
Loosen (but do
not remove) the
screws before
attaching.
Loosen (but do
not remove) the
screws before
attaching.
About the height of the speaker
The height of the speaker top is A + 390 mm.
(A: Between the top of the speaker adaptor and top of the
base.)
base.)
Lowest position: A = 570 mm, Speaker top = 960 mm
Highest position: A = 910 mm, Speaker top = 1,300 mm
Rear of the surround speaker (L)
Connector (gray)
Speaker cord
Click on the first or last page to see other DAV-LF1H service manuals if exist.