Read Sony DAV-FR1 / HCD-F100 / HCD-F50 / HCD-FR1 / MHC-F100 / MHC-F50 / MHC-FR1 Service Manual online
– 11 –
Ve
r.
r.
1.1
16
n
n
Listening to the radio
–– Preset Tuning
Preset radio stations in the tuner's memory
first (see “Step 3: Presetting radio stations”).
first (see “Step 3: Presetting radio stations”).
1
Press TUNER/BAND repeatedly
until the band you want appears.
until the band you want appears.
Each time you press the button, the band
changes as follows:
Singaporian model:
FM n MW n SW
changes as follows:
Singaporian model:
FM n MW n SW
North and South American and
Australian models:
FM ˜ AM
Australian models:
FM ˜ AM
2
Press TUNING MODE repeatedly
until “PRESET” appears.
until “PRESET” appears.
MANUAL n AUTO n PRESET
3
Turn the jog dial (or press
= or
+ on the remote) to tune in the
desired preset station.
desired preset station.
Do this
Press POWER.
Turn VOLUME (or press
VOL +/– on the remote).
VOL +/– on the remote).
To
Turn off the radio
Adjust the volume
STEREO/MONO
3 1
2
VOLUME
POWER
=/+
VOL +/–
TUNER/
BAND
BAND
Turn counter-
clockwise
(or press
clockwise
(or press
=
on the remote)
for lower preset
numbers.
for lower preset
numbers.
Turn clockwise
(or press
(or press
+
on the remote)
for higher
preset numbers.
for higher
preset numbers.
Preset number
Frequency
PRESET
TUNED
STEREO
STEREO
MHz
VOLUME
F M 3 1 0 4 . 0 0
20
Basic Operations
17
You can record the radio program on a tape
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO
by calling up a preset station. You can use
TYPE I (normal) or TYPE II (CrO
2
) tapes. The
recording level is automatically adjusted.
continued
To listen to non-preset radio
stations
stations
Press TUNING MODE repeatedly until
“MANUAL” or “AUTO” appears in step 2,
then tune in the station by turning the jog
dial.
“MANUAL” or “AUTO” appears in step 2,
then tune in the station by turning the jog
dial.
Tips
• Pressing TUNER/BAND when the power is off
automatically turns the power on and tunes to the
last received station (One Touch Play).
last received station (One Touch Play).
• You can switch from another source to the radio
just by pressing TUNER/BAND (Automatic
Source Selection).
Source Selection).
• When an FM program is noisy, press
STEREO/MONO repeatedly until “MONO”
appears in the display. There will be no stereo
effect, but the reception will improve. Press the
button again to restore the stereo effect.
appears in the display. There will be no stereo
effect, but the reception will improve. Press the
button again to restore the stereo effect.
• To improve broadcast reception, reorient the
supplied antennas.
Recording from the
radio
radio
Turn clockwise
for higher
preset numbers.
for higher
preset numbers.
Turn counter-
clockwise for
lower preset
numbers.
clockwise for
lower preset
numbers.
Preset number
Frequency
PRESET
TUNED
STEREO
STEREO
MHz
VOLUME
F M 3 1 0 4 . 0 0
20
1
Press TUNER/BAND repeatedly
until the band you want appears.
until the band you want appears.
2
Press TUNING MODE repeatedly
until “PRESET” appears.
until “PRESET” appears.
3
Turn the jog dial to tune in the
desired preset station.
desired preset station.
4
1
6
DOLBY NR
πSTOP
3
2
7 5
POWER
Click on the first or last page to see other DAV-FR1 / HCD-F100 / HCD-F50 / HCD-FR1 / MHC-F100 / MHC-F50 / MHC-FR1 service manuals if exist.