Read Sony DAV-FR1 / HCD-F100 / HCD-F50 / HCD-FR1 / MHC-F100 / MHC-F50 / MHC-FR1 Service Manual online
– 12 –
Ve
r. 1.1
r. 1.1
18
Playing a tape
You can use any type of tape, TYPE I
(normal), TYPE II (CrO
(normal), TYPE II (CrO
2
) or TYPE IV (metal) ,
since the deck automatically detects the tape
type.
type.
4
Press
§ EJECT and insert a blank
tape into deck B.
5
Press REC
®.
Deck B stands by for recording.
6
Press DIRECTION repeatedly to
select
select
A to record on one side.
Select
ß (or RELAY) to record on
both sides.
7
Press PAUSE
∏.
Recording starts.
To stop recording
Press
π STOP.
Tips
• If you want to record from the reverse side, press
TAPE B
ª so that ª (for reverse side) lights up.
• When you record on both sides, be sure to start
from the front side. If you start from the reverse
side, recording stops at the end of the reverse side.
side, recording stops at the end of the reverse side.
• You can still rewind or fast-forward Deck B by
pressing the
º or ‚ keys on the main unit,
even while using the tuner.
• To record non-preset stations, select “MANUAL”
in step 2, then turn the jog dial to tune in the
desired station.
desired station.
• When you want to reduce the hiss noise in low-
level high-frequency signals, press DOLBY NR so
that “DOLBY NR B” appears before step 7.
that “DOLBY NR B” appears before step 7.
• If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
Recording from the radio
(continued)
(continued)
With the side
you want to
record facing
forward
you want to
record facing
forward
1
2
DOLBY NR
3
1
VOLUME
º/‚
πSTOP
POWER
0/)
VOL +/–
P
p
TAPE A
(
TAPE B
(
Basic Operations
19
1
Press
§ EJECT and insert a
recorded tape in deck A or B.
2
Press DIRECTION repeatedly to
select
select
A to play one side. Select ß*
to play both sides.
To play both decks in succession, select
RELAY (relay play).**
RELAY (relay play).**
3
Press TAPE A
· or TAPE B ·.
Press
ª (or TAPE A ( or TAPE B (
on the remote again) to play the reverse
side. The tape starts playing.
side. The tape starts playing.
* The deck stops automatically after repeating the
sequence five times.
** Relay play always follows the following
sequence:
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
Deck A (front side), Deck A (reverse side),
Deck B (front side), Deck B (reverse side).
Tips
• Pressing TAPE A
ª/· or TAPE B ª/·
when the power is off automatically turns the
power on and starts tape playback if there is a tape
in the deck (One Touch Play).
power on and starts tape playback if there is a tape
in the deck (One Touch Play).
• You can switch from another source to the tape
deck just by pressing TAPE A
ª/· or TAPE B
ª/· (Automatic Source Selection).
• When you play a tape recorded with Dolby NR B,
pressDOLBY NR so that “DOLBY NR B” appears.
To
Stop play
Pause (Deck B only)
Fast-forward
Rewind
Remove the cassette
Adjust the volume
Do this
Press
π STOP (or p on the
remote).
Press PAUSE
∏ (or P on
the remote). Press again to
resume play.
resume play.
Press
‚ while playing
the front side or
º while
playing the reverse side.
This fast-forwards the deck
shown on the display
(TAPE A or TAPE B).
This fast-forwards the deck
shown on the display
(TAPE A or TAPE B).
Press
º while playing
the front side or
‚ while
playing the reverse side.
This rewinds the deck
shown on the display
(TAPE A or TAPE B).
This rewinds the deck
shown on the display
(TAPE A or TAPE B).
Press
§ EJECT.
Turn VOLUME (or press
VOL +/– on the remote).
VOL +/– on the remote).
With the side
you want to
play facing
forward
you want to
play facing
forward
Click on the first or last page to see other DAV-FR1 / HCD-F100 / HCD-F50 / HCD-FR1 / MHC-F100 / MHC-F50 / MHC-FR1 service manuals if exist.