Read Sony CMT-EH20DAB / HCD-EH20DAB Service Manual online
5
HCD-EH20DAB
Other Operations
Creating your own CD program
(Program Play)
Use buttons on the remote to create your own program.
When programing MP3 files, press
The program remains available unit you open the CD
compartment. To play it again, select the CD function,
and press
compartment. To play it again, select the CD function,
and press
repeatadly to select the desired folder, and then select
the desired file.
the desired file.
1
Press CD
to select the CD function.
2
Press PLAY MODE
repeatedly until “PGM” appears
while the player is stopped.
3
Press
/
(or
/
on the unit)
7
repeatedly until the desired track number appears.
+/– qh
4
Press ENTER
To play your program of tracks or files, press
program.
to add the track or file the
5
Repeat steps 3 through 4 to program additional
tracks or files, up to a total of 15 trcks or files.
tracks or files, up to a total of 15 trcks or files.
6
(play)
(or CD/
(play/pause)
on the unit).
(play)
(or CD/
(play/pause)
on the unit).
To cancel Program Play, press PLAY MODE
To delete the last track or file of the program, press
CLEAR ql while the player is stopped.
CLEAR ql while the player is stopped.
repeatedly until “PGM” disappears while the player is
stopped.
stopped.
To view program information, such as total track number
of the program, press DISPLAY
of the program, press DISPLAY
repeatedly.
Presetting radio stations
You can preset your favorite radio stations and tune
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
them in instantly by selecting the corresponding preset
number.
Use buttons on the remote to preset stations.
1
Tune in the desired station (see “Listening to the
radio”).
radio”).
2
Press TUNER MEMORY
.
Preset number
3
Press +/– (or TUNING + or – on the unit)
repeatedly to select your desired preset number.
repeatedly to select your desired preset number.
If another station is already assigned to the selected
You can preset up to 20 DAB and 20 FM stations. The
preset number, the station is replaced by the new
stations.
stations.
4
Press ENTER
.
5
Repeat steps 1 through 4 to store other stations.
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
if you disconnect the power cord or if a power failure
occurs.
6
To call up a preset radio station, press TUNING
MODE
MODE
repeatedly until “PRESET” appears, and
then press +/– (or TUNING + or – on the unit)
repeatedly to select the desired preset number.
repeatedly to select the desired preset number.
Note on presetting DAB stations
You can preset a DAB service only when it can be received.
Recording onto a tape
Use a TYPE I (normal) tape only.
You can record just the portions you like from a sound
source, including connected audio components.
source, including connected audio components.
Use buttons on the unit to control tape recording.
1
Insert a recordable tape into the cassette holder
with the side you want to record facing forward.
with the side you want to record facing forward.
2
Prepare the recording source.
Select the desired source to record.
Place the disc you want to record.
When recording a folder from an MP3 disc, press
PLAY MODE
Place the disc you want to record.
When recording a folder from an MP3 disc, press
PLAY MODE
on the remote repeatedly to select
“
,” and then press
+/– qh on the remote
repeatedly to select the desired folder.
your desired order, perform steps 2 to 5 of “Creating
To record only your favorite CD tracks or MP3 files in
your own CD program.”
3
Start recording.
Press (record)
, and then start playing the
desired recording source.
The CD starts playing automatically.
The CD starts playing automatically.
If there is noise while recording from the tuner,
reposition the appropriate antenna to reduce the
noise.
While recording, you cannot listen to other sources.
reposition the appropriate antenna to reduce the
noise.
While recording, you cannot listen to other sources.
To stop recording, press
(stop/eject)
.
Tip
We recommend that you press (pause)
first, and then press
(stop/eject)
to avoid noise being recorded when you stop
recording.
Selected track or file number
Using the Timers
timers, the Sleep Timer has priority.
The system offers two timer functions. If you use both
Sleep Timer:
the clock is not set.
“AUTO”, the system automatically turns off after the
You can fall asleep to music. This function works even if
Press SLEEP w;
on the remote repeatedly. If you select
current disc or tape stops or in 100 minutes.
If the tape deck is still playing or recording at the set
time, the system turns off after the tape deck stops.
If the tape deck is still playing or recording at the set
time, the system turns off after the tape deck stops.
Play Timer:
You can wake up to CD or tuner at a preset time.
Use buttons on the remote to control the Play Timer.
Make sure you have set the clock.
Make sure you have set the clock.
1
Prepare the sound source.
Prepare the sound source, and then press VOLUME
+/– (or turn the VOLUME control on the unit)
+/– (or turn the VOLUME control on the unit)
to
adjust the volume.
To start from a specific CD track or MP3 file, create
To start from a specific CD track or MP3 file, create
“ON TIME” appears, and the hour indication flashes.
your own CD program.
2
Press CLOCK/TIMER SET
.
3
Press
/
repeatedly to select “PLAY SET,”
and then press ENTER
.
4
Set the time to start playing.
Press
/
repeatedly to set the hour, and
then press ENTER
.
above to set the minute.
The minute indication flashes. Use the procedure
5
Use the same procedure as in step 4 to set the time
to stop playing.
to stop playing.
6
Select the sound source.
Press
/
repeatedly until the desired
sound source appears, and then press ENTER . The
display shows the timer settings.
display shows the timer settings.
7
Press to
turn
off the system.
If the system is on at the preset time, the Play Timer
The system turns on 15 seconds before the preset time.
will not play.
To activate or check the timer again, press CLOCK/
TIMER SELECT
TIMER SELECT
, press
/
repeatedly until
“PLAY SEL” appears, and then press ENTER
.
To cancel a timer, repeat the same procedure as above
until “OFF” appears, and then press ENTER
until “OFF” appears, and then press ENTER
.
To change the setting, start over from step 1.
Tip
manually.
The Play Timer setting remains as long as the setting is not canceled
Click on the first or last page to see other CMT-EH20DAB / HCD-EH20DAB service manuals if exist.