Read Sony CDP-XE900 / CDP-XE900E Service Manual online
— 7 —
4-2. ADJ MODE
The following operations are performed in the ADJ mode, which is
set by connecting the TP1 (ADJ) terminal to the Ground and turning
on the power.
set by connecting the TP1 (ADJ) terminal to the Ground and turning
on the power.
• During playback, there is no problem even if the GFS is continu-
ously LOW.
• High speed search is prohibited during access.
• During playback, the gain of focus servo and spindle servo does
• During playback, the gain of focus servo and spindle servo does
not decrease.
• Servo related manual operations and measurement can be per-
formed.
(For details of operations, refer to Table of Key Operrations in ADJ
Mode.)
(For details of operations, refer to Table of Key Operrations in ADJ
Mode.)
4-3. CLV-S MODE
The spindle servo for playback sets into the CLV-S mode when the
TP1 (ADJ) terminal is connected to Ground after turning on the power.
TP1 (ADJ) terminal is connected to Ground after turning on the power.
TABLE OF BUTTON OPERATIONS IN ADJ MODE
The jitter value display mode can be set after the all-music remaining
number mode using the TIME button.
number mode using the TIME button.
The functions of the number buttons are shown in the following table.
FUNCTIONS OF NUMBER BUTTONS
(With the attached remote commander)
(With the attached remote commander)
[ MAIN BOARD ] — Component Side —
1
2
3
4
5
6
7
8
10
Focus bias 8-step up
Middle of focus bias up/down turning point
Tracking servo, sled servo off
Auto gain initialization
Focus servo off
Focus bias 8-step down
Immediate readjustment of focus bias
Tracking servo, sled servo on
Auto focus bias start point
Function
Button
CN301
CN302
TP1 (ADJ)
R362
TP2 (AFADJ)
R362
TP2 (AFADJ)
EB602
Click on the first or last page to see other CDP-XE900 / CDP-XE900E service manuals if exist.