Read Sony BDV-E670W / BDV-E970W / HBD-E970W Service Manual online
HBD-E670W/E970W
8
NOTE THE BD DRIVE (BPX-5) PARTS REPLACING
The mechanism blocks except optical pick-up block of BD drive
(BPX-5) are chiefl y composed of the following parts.
•
The mechanism blocks except optical pick-up block of BD drive
(BPX-5) are chiefl y composed of the following parts.
•
CHUCK HOLDER ASSY
•
LOADING ASSY
•
HOLDER, FFC (REAR)
These parts are produced by two venders, it is not compatible.
Therefore, CHUCK HOLDER ASSY and LOADING ASSY are
supplied by one pair as repair parts. Please exchange both CHUCK
HOLDER ASSY and LOADING ASSY at the same time.
Therefore, CHUCK HOLDER ASSY and LOADING ASSY are
supplied by one pair as repair parts. Please exchange both CHUCK
HOLDER ASSY and LOADING ASSY at the same time.
HOLDER FFC (REAR) need not be exchanged at the same time.
Note: The laser caution label is not pasted to LOADING FOR SERVICE
(Part No. A-1750-926-A). Please peel off an original laser caution
label, and paste it to LOADING FOR SERVICE when you use
LOADING FOR SERVICE.
label, and paste it to LOADING FOR SERVICE when you use
LOADING FOR SERVICE.
LASER CAUTION LABEL
CHUCK HOLDER ASSY
LOADING ASSY
LOADING FOR SERVICE
HOLDER, FFC (REAR)
MODEL IDENTIFICATION
– Rear Chassis –
– Rear Chassis –
Part No.
Model
Part No.
E970W: AEP model
4-161-684-7[]
E970W: Singapore model
4-161-684-8[]
E670W: UK model
4-161-686-4[]
E970W: Russian model
4-161-687-0[]
E970W: Saudi Arabia model
4-161-687-1[]
E970W: Chinese model
4-161-687-2[]
E970W: Australian model
4-161-687-3[]
E970W: Taiwan model
4-161-687-4[]
CAPACITOR ELECTRICAL DISCHARGE PROCESSING
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistors referring to the fi gure below.
When checking the board, the electrical discharge is necessary for
the electric shock prevention.
Connect the resistors referring to the fi gure below.
•
MAIN board (C3115, C3125, C3215, C3315)
Both ends of CN3001.
C3115
C3315
C3125
C3215
1
4
CN3001
– MAIN Board (Conductor Side) –
800
:/2 W
•
POWER board (C903, C932, C933)
Both ends of respective capacitors.
C903
C932 C933
– POWER Board (Conductor Side) –
800
:/2 W
800
:/2 W
800
:/2 W
NOTE OF REPLACING THE IC3100 AND IC3200
ON THE MAIN BOARD AND THE COMPLETE MAIN
BOARD
When IC3100 and IC3200 on the MAIN board and the complete
MAIN board are replaced, it is necessary to spread the compound
(THERMAL COMPOUND (G747)) (Part No. J-2501-221-A ) be-
tween parts and heat sink.
Spread the compound referring to the fi gure below.
BOARD
When IC3100 and IC3200 on the MAIN board and the complete
MAIN board are replaced, it is necessary to spread the compound
(THERMAL COMPOUND (G747)) (Part No. J-2501-221-A ) be-
tween parts and heat sink.
Spread the compound referring to the fi gure below.
– MAIN Board (Component Side) –
IC3200
IC3100
IC3100
IC3200
Ver. 1.1
Click on the first or last page to see other BDV-E670W / BDV-E970W / HBD-E970W service manuals if exist.