BDV-E300, BDV-E801, BDV-T10, BDV-T11, HCD-E300, HCD-E301, HCD-E801, HCD-T10, HCD-T11 - Sony Audio Service Manual (repair manual). Page 22

Read Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual online

HCD-E300/E801/T10/T11
22
SECTION  4
ELECTRICAL  CHECK
FM Tuner Level Check
signal 
generator
set
Procedure:
1.  Turn on the set.
2.  Input the following signal from Signal Generator to FM antenna 
input directly.
Carrier frequency : A = 87.5 MHz, B = 98 MHz, C = 108 MHz
Deviation 
: 75 kHz
Modulation 
: 1 kHz
ANT input 
: 35 dBu (EMF)
Note: Use 75 ohm coaxial cable to connect signal generator and the set. 
You cannot use video cable for checking.
 
Use signal generator whose output impedance is 75 ohm.
3.  Set to FM tuner function and tune A, B and C signals.
4. Confi rm “TUNED” is lit on the display for A, B and C signals.
When the selected station signal is received in good condi-
tion, “TUNED” is displayed.
4-2. Networking Confi rmation
Confi rm it according to the following procedure when you confi rm 
the connection of the network.
Note: Do not execute “Network Diagnostic” of “Set up” of the home 
menu with only the router connected.
Procedure:
1.  Connect the router with the set with LAN cable.
2.  Turn on the power of the set and the router.
3.  Press the [HOME] button on the remote commander, and the 
home menu is displayed.
4.  Select “Set up” 
→ “Network Settings” → “Internet Settings”, 
and press the [
3
] button on the remote commander.
5. Confi rm “Use DHCP” is displayed in “IP Address Acquisi-
tion”, and confi rm IP address are displayed in “IP Address”, 
“Subnet Mask” and “Default Gateway”.
Internet Settings
IP Address Acquisition
Use DHCP
IP Address
XXX.XXX.XXX.XXX
DNS Server Acquisition
Auto Acquisition
DNS Server (Primary)
XXX.XXX.XXX.XXX
Subnet Mask
XXX.XXX.XXX.XXX
Default Gateway
XXX.XXX.XXX.XXX
Ver. 1.1
Page of 124
Display

Click on the first or last page to see other BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 service manuals if exist.