Read Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual online
HCD-E300/E801/T10/T11
21
4. CONFIRMATION ITEM
4-1. Playback Operation Confi rmation
4-1-1. Test Disc
4-1. Playback Operation Confi rmation
4-1-1. Test Disc
Part No.
Description
Layer
J-6090-199-A
BLX-104
Single Layer
J-6090-200-A
BLX-204
Dual Layer
3-702-101-01
CD (YEDS-18)
J-6090-088-A
HLX-504
Single Layer (NTSC)
J-6090-089-A
HLX-505
Dual Layer (NTSC)
J-6090-077-A
HLX-506
Single Layer (PAL)
J-6090-078-A
HLX-507
Dual Layer (PAL)
Note: Refer to the service manual of BDP-BX1/S350 (Part No. 9-883-
989-1[]) (page 1-3 to 1-14E) for the use of BLX-104/204.
Operation and Display:
1. BLX-104
Procedure:
1. Select
Procedure:
1. Select
23.976Hz/1080p.
2. Play “4.Motion picture”.
3. Check whether player can play back or not.
4. Check each outputs.
Video:
Composite/S
3. Check whether player can play back or not.
4. Check each outputs.
Video:
Composite/S
Video/component/HDMI.
Audio:
Speaker
Speaker
out.
* When 1080/24p monitor is nothing, 1080i (59.94Hz or 50Hz)
can use instead of 1080/24p.
However this is temporary correspondence.
* When the output of HDMI is 1080p, the signal of Composite/S
Video/Component are not output.
It is necessary to lower the output of HDMI to 1080i or less.
2. BLX-204
Procedure:
1. Select 1080i (59.94Hz or 50Hz).
2. Play “4.Motion picture”.
3. Check whether player can play back or not.
Procedure:
1. Select 1080i (59.94Hz or 50Hz).
2. Play “4.Motion picture”.
3. Check whether player can play back or not.
(Check the picture and sound output)
3. CD (YEDS-18)
Procedure:
Check whether player can play back or not.
(Check the sound output)
Procedure:
Check whether player can play back or not.
(Check the sound output)
4. HLX-504/505 (NTSC), HLX-506/507 (PAL)
Procedure:
1. After displayed Main Menu, select “1.Video Signal”.
2. Play “1.Color bar 100%”.
Procedure:
1. After displayed Main Menu, select “1.Video Signal”.
2. Play “1.Color bar 100%”.
(Check the picture and sound output)
3. Return to Menu.
4. Play “Demonstration 4:3” or “Demonstration 16:9”.
4. Play “Demonstration 4:3” or “Demonstration 16:9”.
(Check the picture and sound output)
4-1-2. Playback operation confi rmation
Confi rm operation in each signal/output mode of test disc (BLX-
104/204) according to the content of the repair.
Confi rm operation in each signal/output mode of test disc (BLX-
104/204) according to the content of the repair.
Note: “AV Sync.” doesn’t operate.
3-11. System Information (System Information Display)
This screen displays system information.
This screen displays system information.
Operation:
[
[
3
] Measures
ΔIOP of the drive (takes a few seconds: 1
time only)
[RETURN] Returns to the top menu of the service mode
*When measuring ΔIOP,
Version Up function in the Service Mode menu will no longer be
available.
available.
Displayed contents:
Model name
Model name
: Model
Destination :
Dest
IP address
: IP
Mac address
: Mac
CPU version
: CPU
← [FirmVersion] [GenerationVersion]
NBL version
: NBL
Kernel version : Kernel
Host version
Host version
: Host
← [HostVersion] [ReleaseVersion]
Optical disc drive : Drive
← [Model] [FirmRevision] [SerialNum
ber]
Drive usage time : LDTime
← [Media]: [LDTime]/[ΔIOP]/ΔIOP/
ΔIOP
ΔIOP temperature
measurement :
measurement :
dIOP_TEMP
IFCon version *Not available.
:
:
IFCon
← B0: [Block0 version] B1: [Block1
version]
IFCon Firm date *Not available.
:
:
FirmDate
Set temperature *Not available.
:
:
Temp
← [ºC]
∗ System Information
Model
: BDP3G-SU
Dest
: UC
IP
: 172.16.102.32
Mac
: 00:1a:80:d0:47:65
CPU
: E0.032.0[F021]
NBL
: BDP3G 3.1.0
Kernel
: BDP3G-3.1.0
Host
: 01.0.002
20080121D00 ...
Drive
: BDP200 1.01 @BPD0000557&__40
LDTime
: BD
: [ 0:00] / [ 1]
/dIOP DVD
: [ 0:11] / [ 5]
CD
: [ 0:50] / [ 0]
dIOP_TEMP: [ 0]
Ifcon
: B0: 0x03 B1: 0x01
FirmDate: 03/07 11:55
Temp
: 34 [degC]
[RET]
: TopMenu
Click on the first or last page to see other BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 service manuals if exist.