Read Sony BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 Service Manual online
HCD-E300/E801/T10/T11
17
2-26. Power Handling Mode 1
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-27. Power Handling Mode 2
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-28. Repeat Status Display Mode
Not used for the servicing.
Press the [
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
3. BD SERVICE MODE
Note 1: The operation in this mode must use a remote commander.
Note 2: Connect the monitor with this set with the HDMI cable when you
Note 2: Connect the monitor with this set with the HDMI cable when you
execute this mode.
This mode cannot be executed when connecting it with CVBS
and COMPONENT.
Setting method of the BD service mode:
1. Press the [
1. Press the [
?/1
] button to turn the power on.
2. Press three button in order of the [CLEAR]
→ [
3
]
→ [0] →
[1]
→ [0] → [ANGLE] on the remote commander (Make the
interval when each button is pressed within two seconds).
3. The message “TEST MENU” appears on the fluorescent indi-
cator tube and enter the test menu.
4. Press the [
M
]/[
m
] buttons on the remote commander to select
the “SERVICE IN”, and press the [
3
] button on the remote
commander.
5. Enter the BD service mode.
3-1. Main Functions
• ErrorLog/CommandLog
• ErrorLog/CommandLog
display
Display the error log and command log. Displayed contents
can also be saved in an USB memory device.
can also be saved in an USB memory device.
• Diag
Performs unit test of devices installed on the board.
• Factory
Initialize
Restores the set to its factory settings.
• Network
Checks the network connection.
1. “Ifconfig” displays the network settings of the unit.
1. “Ifconfig” displays the network settings of the unit.
Executing this function will run the #Ifconfig command
and display the result.
and display the result.
2. “Ping” checks the communication status between the net-
work and terminal of the specified IP address.
Executing this function will run the #ping command and
display the result.
display the result.
• Version Up (version update)
Performs version update using a disc. For details concerning
updates, see the attached reference.
updates, see the attached reference.
• Ststem
Information
Displays the system information of the set.
Displays information such as the software version, drive infor-
mation, etc.
mation, etc.
3-2. Menu Tree
∗Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
∗Service Mode Menu
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
[1] Diag
[2] Log
[3] Factory Initialize
[4] Network
[5] Version Up
[6] System Information
Version Up
• Version update using DISC
• Version update using DISC
System Information
• Displays system information
• Displays system information
∗Factory Initialize
• Restores set to factory settings
• Restores set to factory settings
∗Log
Displays Error Log/Command Log
Displays Error Log/Command Log
Error Log
• Displays error log
Command Log
• Displays command log
∗Diag
∗Network
• Network diagnosis
• Network diagnosis
Ping
•
Checks communication status of network
Status
• Checks network settings
Device Test
• Unit test of board devices
• Unit test of board devices
Video Path Test
• Video output test
• Video output test
Audio Path Test
• Audio output test
• Audio output test
• Diag (self-diagnosis tool)
Click on the first or last page to see other BDV-E300 / BDV-E801 / BDV-T10 / BDV-T11 / HCD-E300 / HCD-E301 / HCD-E801 / HCD-T10 / HCD-T11 service manuals if exist.