Read Sharp VC-MH742HM (serv.man32) User Guide / Operation Manual online
GB-6
INSTALLING YOUR VCR
AUTO INSTALLATION
SATELLITE RECEIVER / CABLE BOX CONTROL
If you have a satellite receiver or cable box connected to your VCR you can automatically
install the satellite channels using this feature. The installation procedure for cable boxes is the
same as for satellite receivers (for cable box connections refer to your cable box manual).
install the satellite channels using this feature. The installation procedure for cable boxes is the
same as for satellite receivers (for cable box connections refer to your cable box manual).
Follow steps 1-4 below before INSTALLATION PROCEDURE:
1.
Connect your satellite receiver to the VCR as previously shown.
2.
Place the satellite receiver near the VCR (ideally on the top). This ensures that the
reflected infrared signals from the VCR which control the satellite receiver can reach it
unimpeded.
reflected infrared signals from the VCR which control the satellite receiver can reach it
unimpeded.
3.
Ensure all the channels you wish to be tuned are within channel positions 1-999 on your
satellite receiver as the VCR will only tune the first 999 channels - refer to your satellite
receiver operation manual for instructions on moving channels.
satellite receiver as the VCR will only tune the first 999 channels - refer to your satellite
receiver operation manual for instructions on moving channels.
4.
Ensure the receiver is not in any special mode.
INSTALLATION PROCEDURE
These models automatically tune the TV channels for your area, then using Teletext
information sort the TV channels into a standard order and set the clock.
information sort the TV channels into a standard order and set the clock.
Turn the TV on and select the video channel.
(As previously explained)
(As previously explained)
1.
2.
DIGITAL SATELLITE
IF YOU WISH TO CONNECT YOUR VCR TO A SKY DIGIBOX RECEIVER
GO TO “
GO TO “
INSTALLATION OF A SKY DIGIBOX RECEIVER
” .
•
The satellite channels can now be tuned in as part of the auto-installation procedure.
You will be prompted for further information from the on-screen displays.
You will be prompted for further information from the on-screen displays.
•
SHARP cannot guarantee this feature will work with all satellite receivers and cable
boxes.
boxes.
•
See the list of satellite receiver manufacturers codes at the end of this manual.
All information relevant to satellite receiver control will display this symbol.
Press
STOP
to switch on the VCR.
Step through the on screen instructions by
pressing the
pressing the
SET
button.
REW
FF
PAUSE
/STILL
STOP
PLAY / X 2
MENU
SET
CLEAR
SV/V+
2
1
If problems persist contact the SHARP Customer Helpline on tel: 0990-274277
See next page to continue
Module 03M.fm Page 6 Thursday, August 12, 1999 3:01 PM
Click on the first or last page to see other VC-MH742HM (serv.man32) service manuals if exist.