Read Sharp VC-MH731HM (serv.man10) User Guide / Operation Manual online
4
RF OUT
SORTIE ANTENNE
ANTENNA IN
ENTREE ANTENNE
The VCR is correctly connected.
Connect your existing aerial cable to
the ANTENNA IN socket on your
VCR.
the ANTENNA IN socket on your
VCR.
INSTALLING YOUR VCR
CONNECTING THE CABLES
Optional:
Connect your Satellite
receiver or decoder to the VCR
using a scart lead to LINE 2
IN/DECODER socket on the
VCR.
using a scart lead to LINE 2
IN/DECODER socket on the
VCR.
Connect your TV to the VCR using
the supplied RF connection cable,
i.e. connect the VCR RF OUT
socket to the TV AERIAL IN socket.
the supplied RF connection cable,
i.e. connect the VCR RF OUT
socket to the TV AERIAL IN socket.
BACK OF
TELEVISION
Connect the VCR to the
mains
mains
2
3
1
DECODER UNIT OR
SATELLITE SYSTEM
AERIAL OR
CATV CABLE
CATV CABLE
Optional SCART (not supplied). If you have a scart lead connect it to your
TV and LINE 1 IN/OUT socket on the VCR.
TV and LINE 1 IN/OUT socket on the VCR.
●
To obtain stereo sound output, connect your stereo TV to the “AUDIO OUT” terminals
using audio phono leads, or to the line 1 IN/OUT terminal using scart leads as shown.
●
Sound from RF OUT terminal is mono only
●
If your tv has more than 1 scart socket, refer to your TV operation manual for correct scart
connection to the VCR
●
For NEXTVIEW LINK operation, a fully wired scart cable must be used.
vc-m331/mh731hm 3/2/99 1:34 pm Page 8
Click on the first or last page to see other VC-MH731HM (serv.man10) service manuals if exist.